aharabagiu

Hi, The problem was with / partition on HMC being at 100%. With that resolved, everything went back to normal. Thank you very much for your help. Sincerely, Alex Harabagiu

Works very well with SecurityLevel = low Thank you very much for the suggestion.

Apologies. Double checked my work: the account was defined with "Account Admin (View Only)". Changed that to "Storage Administrator (View Only)" and it works as designed. Thank you very much for your help in this matter.

Thank you very much! I was able to pass that step and register the array.

Thanks.I'm going through the configuration procedure:- check for libstdc++ - is there! # rpm -qa|grep libstdc++ libstdc++-4.8.5-36.el7_6.2.x86_64 - installed HSMN2 CLI as per instructions - Done!- changed ownership of /usr/stonavm to stor2rrd - Done!- switched to stor2rrd and set the environment - Done!…

So far, so good.Thank you very much for your help.

Please review the output below: 1: Time = 2019-04-25 11:57:56.255 Message = The DPE has faulted (Part Number 100-542-446-07, Serial Number xxxxxx). Description = "The Disk Processor Enclosure (DPE) has faulted. This may have occurred because of a faulted subcomponent. Identify and fix the issue with the subcomponent. If…

output of "ls -l /home/stor2rrd/stor2rrd/data/VNXe-GWD/*perf_* | wc -l" 7841

1. connectivity test:perl /home/stor2rrd/stor2rrd/bin/conntest.pl XXX.XXX.XXX.XXX 443 TCP connection to "XXX.XXX.XXX.XXX" on port "443" is ok 2. Storage query (under root and stor2rrd users):uemcli -d XXX.XXX.XXX.XXX -u Local/admin -p 'XXXX' /user/account show Storage system address: XXX.XXX.XXX.XXX Storage system port:…

Hi Pavel: Thank you very much for this solution. I was having the same problem after upgrade to v6.0.0 - API Data Collection timing out; I've applied your suggestion and verything is back to normal. Much appreciated.

1. SDK upgraded to v6.5.0: $ perl ~/lpar2rrd/vmware-lib/apps/connect.pl --version vSphere SDK for Perl version: 6.5.0 Script 'connect.pl' version: 1.0 2. under lpar2rrd user: ./load.sh ./load.sh html 3. no change 4. logs uploaded

Sorry for the delay! All good. Thank you very much for your help on this matter.

Thanks, but before I was able to see the LPARs as 'Unmanaged', and the O/S client was providing all the necessary data. I will add that portion, but it seems redundant since I'm using the LPAR2RRD client loaded locally on each client.

I've uploaded the logs.

Thank you very much.

Never mind. My mistake: I didn't read the documentation - all there

Thanks! Based on this I was able to determine the cause: the hostname defined inside the public key; once I've changed that to IP, it worked just fine.

STOR2RRD version: 2.30

Yes, this sequence works.However, config_check.sh fails...

This test works fine, but config_check.sh still fails with the same error. On Linux, does Perl LWP module have to be at 6.x (currently is 6.02), or it works with 5.83 as well? (i'm connecting to EMC storage ONLY)

For Unity and VNXe, I have to use special characters and in this case I've used this '!'

I'm getting: -bash: !'": event not found where ! is the last character in the password. Now, if in your expression I replace " with ', I get this: Bareword found where operator expected at -e line 1, near "XXXX" (Missing operator before XXXX ?) syntax error at -e line 1, near "XXXXX" Execution of -e aborted due to…

Yes. [stor2rrd@storMan stor2rrd]$ rpm -qa| grep -i TimeDate perl-TimeDate-1.16-13.el6.noarch

Thanks for the reply, but I'm not in AIX; for Unity and VNXe I was "forced" to use CentOS 6.9: UnisphereCLI for Unity and VNXe works only in Linux or Windows. I've placed the path you suggested at the end of PERL5LIB, but it didn't make a difference. Is there a file to erase, so I can recreate the encrypted password, or do…

Thanks, but I think you misunderstood me: I want to create a user and grant him rights to Storage and SAN. The problem is: the said user will not see any of the SAN switches, because the SAN option 'de-selects' itself from the user's profile, even if it was present at the time when I saved the said profile.

I REALLY appologize, my mistake: under httpd.conf file I've skipped "AllowOverride AuthConfig FileInfo" under CGI-BIN section. All set and working as expected. My apologies, one more time!

No. On your demo site, it's working just fine.

Please review the attached error.

Yes. To the letter.

Spoke too soon: under "menu -> LPAR2RRD -> User Management" still says: "Apache authentication is not defined for this tool. Please follow online instructions to get it work." but it's asking for username/password at the beginning. So, what am I missing?