Need help with configure storage storwize V7000 Stor2rrd

Rifkinurgraha
Rifkinurgraha
edited March 2017 in IBM
Hello, I'm having trouble with configure storage.

I followed the steps on this page http://www.stor2rrd.com/IBM-install.htm and When I run ./bin/config_check.sh (I am SU'ed to lpar2rrd) I get the error below thats connection failed. I created the ssh keys while su'ed to lpar2rrd as well. Not sure what I did wrong? I'm pretty sure I followed the instructions carefully. Please help.

[root@xorux stor2rrd]# su - lpar2rrd
[lpar2rrd@xorux stor2rrd]$ cd /home/stor2rrd/stor2rrd[lpar2rrd@xorux stor2rrd]$ ./bin/config_check.sh=========================STORAGE: storwize01: SWIZ : sample rate: 300 seconds=========================  ssh -o ConnectTimeout=15 -o StrictHostKeyChecking=no lpar2rrd@10.8.140.10  "lscurrentuser"Enter passphrase for key '/home/lpar2rrd/.ssh/id_rsa': 
connection failed!!

and After i followed the steps http://www.stor2rrd.com/IBM-install.htm , i go to the web GUI: http://<your web server>/stor2rrd/, and the result Storwize v7000 not detected .picture below.

Comments

  • Pavel
    Pavel
    Hi,

    You have to create ssh key without passphrase
    Type enter when you are asked for it during ssh-keygen.

    Lets create it again

    su - lpa2rrd
    rm /home/lpar2rrd/.ssh/*rsa*
    ssh -i /home/lpar2rrd/.ssh/id_dsa  lpar2rrd@192.168.254.49  "lscurrentuser"

    ssh-keygen -t rsa     # type enter on pasphrase prompt
    ls -l ~/.ssh/id_rsa.pub
    scp ~/.ssh/id_rsa.pub superuser@<storage IP>:/tmp/123tmp
    ssh superuser@<storage IP> "svctask chuser -keyfile /tmp/123tmp lpar2rrd"
    ssh lpar2rrd@<storage IP>  "lscurrentuser"

    now try :
    ./bin/config_check.sh


  • Rifkinurgraha
    Rifkinurgraha
    Thanks for reply :smile: 

    i have one problem again, i confused about Configure storages in etc/storage-list.cfg. on this page http://www.stor2rrd.com/IBM-install.htm have a direct like this .

    $ vi /home/stor2rrd/stor2rrd/etc/storage-list.cfg  

#
# IBM STORWIZE, IBM SVC and IBM FlashSystem
#
# Storage name alias:SWIZ:control enclosure IP/hostname:ssh_key_file:VOLUME_AGG_DATA_LIM:VOLUME_AGG_IO_LIM:SAMPLE_RATE_MINS
#
#storwize01:SWIZ:storwize_host.example.com:/home/stor2rrd/.ssh/id_rsa
#svc01:SWIZ:svc_host.example.com:/home/stor2rrd/.ssh/id_rsa:2048:512:5
#svc02:SWIZ:__storage_IP__:
storwize01:SWIZ:192.168.1.1:


so the question, i copy and attach all direct? 


Thank you.

Sincerly,
Rifki Nurgraha




  • Pavel
    Pavel
    just edit that file and add 1 row iwth your storage configuration like this:
    storwize01:SWIZ:192.168.1.1:

  • Rifkinurgraha
    Rifkinurgraha
    Thank you Mr pevel.

    thats mean i remove all in etc/storage-list.cfg. and i copy attach that direct?
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion