DellEMC Unisphere UNITY380F API authorization: NOK

Hi,

The storage enlisted as Dell EMC Unity.
For monitoring user stor2rrd created with Operator rights.
Connection test results:

API host network connection: TCP connection to 10.254.253.37:443 is OK.
Crontab test: OK
API authorization: NOK

Comments

  • Hi,

    send us this output via email support@stor2rrd.com

    su - stor2rrd (lpar2rrd on the virtual appliance)
    cd /home/stor2rrd/stor2rrd
    ./bin/config_check.sh <storage alias>


  • DenisM
    edited November 2021
    I think it's too small to use email. The output is,

    =========================
    STORAGE: Unity: UNITY
    =========================
      TCP connection to "X.X.X.X" on port "443" is ok
    uemcli -d X.X.X.X -u stor2rrd -p XXX -noHeader /sys/general show -detail
    ./bin/config_check.sh: line 4129: uemcli: command not found

      connection failed!!


  • I installed that now, UnisphereCLI-Linux-64-x86-en_US-5.1.0.1376170-1.x86_64.rpm.
    So now I have uemcli.
    But how long may it take to complete? It output minutes ago,
    =========================
    STORAGE: Unity: UNITY
    =========================
      TCP connection to "x.x.x.x" on port "443" is ok
    /usr/bin/uemcli -d x.x.x.x -u stor2rrd -p XXX -noHeader /sys/general show -detail
    Did it hang?
  • Ok, it implicitly waits for user's input,
    Would you like to:
      [1] Accept the certificate for this session
      [2] Reject the certificate
      [3] Accept and store
    After typing 3 <Enter> the connection established.
Sign In or Register to comment.