DellEMC Unisphere UNITY380F API authorization: NOK

DenisM

Hi,

The storage enlisted as Dell EMC Unity.
For monitoring user stor2rrd created with Operator rights.
Connection test results:

API host network connection: TCP connection to 10.254.253.37:443 is OK.
Crontab test: OK
API authorization: NOK

Pavel

Hi,

send us this output via email support@stor2rrd.com

su - stor2rrd (lpar2rrd on the virtual appliance)
cd /home/stor2rrd/stor2rrd
./bin/config_check.sh <storage alias>

DenisM

I think it's too small to use email. The output is,

=========================
STORAGE: Unity: UNITY
=========================
  TCP connection to "X.X.X.X" on port "443" is ok
uemcli -d X.X.X.X -u stor2rrd -p XXX -noHeader /sys/general show -detail
./bin/config_check.sh: line 4129: uemcli: command not found

  connection failed!!

Pavel

Hi,

have you installed uemcli as per the docu?

https://stor2rrd.com/EMC-PowerMax-VMAX-VNX-Unity-VPLEX-DataDomain-Isilon-XtremIO-CLARiiON-Celerra-monitoring.php#UNITY  --> EMC Unisphere API installation

DenisM

I installed that now, UnisphereCLI-Linux-64-x86-en_US-5.1.0.1376170-1.x86_64.rpm.
So now I have uemcli.
But how long may it take to complete? It output minutes ago,

=========================
STORAGE: Unity: UNITY
=========================
  TCP connection to "x.x.x.x" on port "443" is ok
/usr/bin/uemcli -d x.x.x.x -u stor2rrd -p XXX -noHeader /sys/general show -detail

Did it hang?

DenisM

Ok, it implicitly waits for user's input,

Would you like to:
  [1] Accept the certificate for this session
  [2] Reject the certificate
  [3] Accept and store

After typing 3 <Enter> the connection established.