SNMP Community String contain #

jafiznazim

Is there an option to use the community sting have #

for example 10.10.10.1:test#test:CISCO:Network_Switches

in GUI able to add the entry, but in lan-list.cfg get the part after # will be ignored

Pavel

Hi,

use only the GUI, lan-list.cfg is ignored since version 2.60+

jafiznazim

Thanks Pavel, this means no need to create the entries in lan-list.cfg

Pavel

no, use the GUI only.

jafiznazim

done the configuration as suggested, still the switches are not displayed in GUI.

Attached the details for reference.

Pavel

wait an hour, then Ctrl-F5 in the UI.

If still nothing then send us logs

Note a short problem description in the text field of the upload form.

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir

tar cvhf logs.tar logs tmp/*txt

gzip -9 logs.tar

Send us logs.tar.gz via https://upload.stor2rrd.com

jafiznazim

Even after 1 Hr the devices are not displayed in GUI, above mentioned log.tar.gz is uploaded.

jafiznazim

Thanks to the support team. The patch worked

point7

I am having the same problem with a LAN switch, my version is 2.61. Please advise if the patch in above post was for this version, if so please assist with a link to the patch.

Karel

Hi,

do you have character "#" in the community string as in the issue above?
If so then use the following 2 files as a fix.

https://download.stor2rrd.com/patch/load_lanperf.sh.gz

Gunzip it and copy to /home/stor2rrd/stor2rrd (755, lpar2rrd owner)

-rwxr-xr-x 1 stor2rrd stor2rrd 7852 28. Nov 14.06 load_lanperf.sh

If your web browser gunzips it automatically then just rename it: mv load_lanperf.sh.gz load_lanperf.sh

https://download.stor2rrd.com/patch/config_check.sh.gz

Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, lpar2rrd owner)

-rwxr-xr-x 1 stor2rrd stor2rrd 129698 28. Nov 14.06 config_check.sh

If your web browser gunzips it automatically then just rename it: mv config_check.sh.gz config_check.sh

Try config_check.sh after deploying that files:

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
./bin/config_check.sh <switch IP>

Let us know.

point7

Works like a charm. Thank you very much