Totals for SAN Switches are not working

Zoltan

Hi,

I just realised today, that the Total for SAN switches are not working (Data is displayed only for 4 switches) . Data and Frame are affected. As I can see, we have this problem since July:

Individual data for all switches are there. What could be the problem? We are using stor2rrd v2.61 currently.

Regards,

Zoltan

Karel

Hi Zoltan,

Send us logs pls. 

Note a short problem description in the text field of the upload form.

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
tar cvhf logs.tar logs tmp/*txt
gzip -9 logs.tar

Send us logs.tar.gz via https://upload.stor2rrd.com

Zoltan

Hi Karel,

I have uploaded the logs.

Karel

Hi Zoltan,

you have got some strange directory called "No more variables left in this MIB View (It is past the end of the MIB tree)" in your data directory. See below. Directory was created on July 17th.

======== ls -l /opt/serviced/volumes/stor2rrd/data
total 1252
...
drwxr-xr-x  2 zenoss zenoss  4096 Jul 17 09:33 No more variables left in this MIB View (It is past the end of the MIB tree)

Remove these files, it should help:

rm -r "/opt/serviced/volumes/stor2rrd/data/No more variables left in this MIB View (It is past the end of the MIB tree)"
rm /opt/serviced/volumes/stor2rrd/tmp/san_last_up*

Let us know tomorrow if it helped, thanks.

Zoltan

Hi Karel,

that caused the problem, Total is working again correctly.

Thank you!