V7000 no cmd file: VOLUME-top-m.cmd

sinhro1202

HI!
We have virtual appliance stor2rrd
After configuring and adding storage V7000 and load data  ./load.sh we get error

$cd /home/stor2rrd/stor2rr
$./load.sh

An error occured, check /home/lpar2rrd/stor2rrd/logs/error.log and output of load.sh

$ tail -1 /home/lpar2rrd/stor2rrd/logs/error.log

Thu Aug  1 18:26:12 2019: storwizeVFARM:VOLUME:top:avrg - no cmd file:/home/stor2rrd/stor2rrd/tmp/storwizeVFARM/VOLUME-top-m.cmd /home/stor2rrd/stor2rrd/bin/volume_inactive.pl:191

Storage succsessfuly added to stor2rrd and show configurations but dont show graphs

Please help!

Pavel

Hi,

logs pls

Note a short problem description in the text field of the upload form.

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
tar cvhf logs.tar logs tmp/*txt
gzip -9 logs.tar

Send us logs.tar.gz via https://upload.stor2rrd.com

sinhro1202

Pavel, i collected and send logs via https://upload.stor2rrd.com

Pavel

Hi,

looks like there is running TPC monitoring which uses 1 minute sample reate (its deault)

stor2rrd uses 5 minutes and same data collection. Both tools must use same sample rate to make it work.

Check that page: https://www.stor2rrd.com/TPC.htm

sinhro1202

Pavel, i cant find where i can change option Data Collection Schedule. We don't have TPC. In stor2rrd configuration where i can change it?

[lpar2rrd@stor2rrd stor2rrd]$ grep Frequency tmp/storwizeVFARM-conf-last.txt

        Performance Statistic Frequency: 1

Pavel

Hi,

1.

grep SAMPLE_RATE= etc/stor2rrd.cfg
  SAMPLE_RATE=300

2. remove IP from output

grep storwizeVFARM etc/storage-list.cfg

sinhro1202

[lpar2rrd@stor2rrd stor2rrd]$ grep SAMPLE_RATE= etc/stor2rrd.cfg

  SAMPLE_RATE=300

[lpar2rrd@stor2rrd stor2rrd]$ grep storwizeVFARM etc/storage-list.cfg

storwizeVFARM:SWIZ:10.2.0.120:

Pavel

Are you really sure you do not use TPC (IBM Spectrum Control / Tivoli Storage Productivity Center) for monitoring of that storage?

Or any other monitoring?

sinhro1202

Pavel, I misled you with TPC. We have TPC. I changed frequency  from 1 to 5 minutes in data collection schedule.
Thanks!