SAN monitoring - port description

Hi,

I configured HW event alerting.
All is good, i'm receiving email alerts.

My question is:
there is a way to add more details?
for example:
Can i add port description?
"STOR2RRD Health Status event for device <SW-NAME> The operational status of the port fc1-7 is down. The operational status reason is linkFailLossOfSignal."

Thanks,
Idan.

Comments

  • Hi Idan,

    which description do you want to add exactly?
  • Hi Karel,

    Port description (show interface fc1/7 description).

    Thanks,
    Idan.

  • Hi Idan,

    can you send us some example of that description what you want?

    Here is an example form our lab:

    cisco01# show interface fc1/7
    fc1/7 is up
        Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
        Port WWN is xxx
        Admin port mode is F, trunk mode is on
        snmp link state traps are enabled
        Port mode is F, FCID is 0x330000
        Port vsan is 1
        Speed is 4 Gbps
        Rate mode is dedicated
        Transmit B2B Credit is 16
        Receive B2B Credit is 16
        Receive data field Size is 2112
        Beacon is turned off
        5 minutes input rate 25771952 bits/sec, 3221494 bytes/sec, 1817 frames/sec
        5 minutes output rate 8760616 bits/sec, 1095077 bytes/sec, 910 frames/sec
          342469052 frames input, 614417341524 bytes
            0 discards, 0 errors
            0 CRC,  0 unknown class
            0 too long, 0 too short
          214883904 frames output, 241994483324 bytes
            0 discards, 0 errors
          2 input OLS, 1 LRR, 1 NOS, 0 loop inits
          1 output OLS, 1 LRR, 2 NOS, 0 loop inits
          16 receive B2B credit remaining
          16 transmit B2B credit remaining
          16 low priority transmit B2B credit remaining
        Interface last changed at Sat Jun 15 21:09:51 2019

Sign In or Register to comment.