No communication to SAN
Using Brocade Fabric OS v7.3.0.c and Virtual Appliance (XoruX-2.32-OVF)
I have followed https://www.stor2rrd.com/install.htm#storages and have tried many time without success.
It seems as every time that I run the ./bin/config_check.sh command, it only sees the Storage subsystem only and not the SAN.
Thanks in advance
I have followed https://www.stor2rrd.com/install.htm#storages and have tried many time without success.
It seems as every time that I run the ./bin/config_check.sh command, it only sees the Storage subsystem only and not the SAN.
Thanks in advance
Comments
-
Logs file
-
Hi,
you have to configure your SAN switches in "/home/stor2rrd/stor2rrd/etc/san-list.cfg".
Your "san-list.cfg" does not contain any configured switches.
Follow this documentation:
https://www.stor2rrd.com/install.htm
--> SAN tab -
@Karel, Thank you. That's exactly what I'm missing.
Howdy, Stranger!
Categories
- 1.5K All Categories
- 9 XORMON NG
- 24 XORMON
- 126 LPAR2RRD
- 10 VMware
- 12 IBM i
- 1 oVirt / RHV
- 4 MS Windows and Hyper-V
- Solaris / OracleVM
- XenServer / Citrix
- Nutanix
- 6 Database
- 1 Cloud
- 9 Kubernetes / OpenShift / Docker
- 105 STOR2RRD
- 14 SAN
- 6 LAN
- 15 IBM
- 3 EMC
- 10 Hitachi
- 5 NetApp
- 13 HPE
- Lenovo
- 1 Huawei
- 1 Dell
- Fujitsu
- 2 DataCore
- INFINIDAT
- 3 Pure Storage
- Oracle