Monitoring for HDS AMS arrays
in SAN
Hi:
I'm looking to monitor two Hitachi arrays: AMS2500 and AMS500. Are these models supported?
Sincerely,
Alex H.
Comments
-
Hi,basically AMS is supported except quite historical firmwares.Definitelly try it, if it does not work then let us know, we will check logs and let you know.
-
Thanks.I'm going through the configuration procedure:- check for libstdc++ - is there!# rpm -qa|grep libstdc++
libstdc++-4.8.5-36.el7_6.2.x86_64- installed HSMN2 CLI as per instructions - Done!- changed ownership of /usr/stonavm to stor2rrd - Done!- switched to stor2rrd and set the environment - Done!LIBPATH=/usr/stonavm/lib:$LIBPATH SHLIB_PATH=/usr/stonavm/lib:$SHLIB_PATH LD_LIBRARY_PATH=/usr/stonavm/lib:$LD_LIBRARY_PATH STONAVM_HOME=/usr/stonavm STONAVM_ACT=on STONAVM_RSP_PASS=on PATH=$PATH:/usr/stonavm export LIBPATH SHLIB_PATH LD_LIBRARY_PATH STONAVM_HOME STONAVM_ACT STONAVM_RSP_PASS PATH
- ran connection test to the array - all OK!- tried to register automatically the array (under stor2rrd or root - tried both):#auunitaddauto -ip <AMS2500_IP> - bash: /usr/stonavm/auunitaddauto: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
That means I'm missing: /lib/ld-linux.so.2How can I resolve this ?
-
Hi,You have downloaded 32bit package.You're on a 64-bit system, and don't have 32-bit library support installed.
To install (baseline) support for 32-bit executables
https://stackoverflow.com/questions/8328250/centos-64-bit-bad-elf-interpreter
-
Thank you very much!I was able to pass that step and register the array.
Howdy, Stranger!
Categories
- 1.5K All Categories
- 31 XORMON NG
- 25 XORMON
- 143 LPAR2RRD
- 12 VMware
- 15 IBM i
- 2 oVirt / RHV
- 4 MS Windows and Hyper-V
- Solaris / OracleVM
- XenServer / Citrix
- Nutanix
- 6 Database
- 2 Cloud
- 10 Kubernetes / OpenShift / Docker
- 121 STOR2RRD
- 18 SAN
- 7 LAN
- 17 IBM
- 3 EMC
- 12 Hitachi
- 5 NetApp
- 15 HPE
- Lenovo
- 1 Huawei
- 1 Dell
- Fujitsu
- 2 DataCore
- INFINIDAT
- 3 Pure Storage
- Oracle