Storwize V5010 with Code Level 8.1.1.0 not working

aklausing
aklausing
in IBM
Hi,

maybe I need new glasses but I was not able to find an answer for my problem.
I am just in testing STOR2RRD (appliance on vmware) with a brand new IBM V5010 that already has been updated to code level 8.1.1.0.

Even after an hour of waiting I cannot see the storage listed. Two also attached brocade fc switches work fine. So it seems like a problem with the storage and not the appliance itself. The config_check.sh script says "ok" for the storage.

In the error log I see:

scp: /dumps/svc.config.cron.xml_7814T08-2: No such file or directory

svcconfig.pl: ERROR: Command "scp -i /home/lpar2rrd/.ssh/id_rsa  lpar2rrd@192.168.201.51 /home/lpar2rrd/stor2rrd/data/v5010" failed.

This line repeats in the log.

The output log tells me the following:

/home/lpar2rrd/stor2rrd/bin/svc_stor_load.sh: 2018-01-17_17:15 : Command svcconfig.pl ends with return code 1

Wed Jan 17 17:20:02 2018 - INFO    - svcconfig.pl: H/W type, iostats dumps file name (Storwize V7000): dump_name.

Wed Jan 17 17:20:02 2018 - INFO    - svcconfig.pl: H/W type, iostats dumps file name (Storwize V7000): dump_name.

Wed Jan 17 17:20:03 2018 - INFO    - svcconfig.pl: Front panel ID/Dump name: 7814T08-2

Wed Jan 17 17:20:03 2018 - INFO    - svcconfig.pl: node: 2 ID: 7814T08-2 XML filename name: svc.config.cron.xml_7814T08-2

Wed Jan 17 17:20:03 2018 - INFO    - svcconfig.pl: scp -i /home/stor2rrd/.ssh/id_rsa  lpar2rrd@192.168.201.51:/dumps/svc.config.cron.xml_7814T08-2 /home/lpar2rrd/stor2rrd/data/v5010/svc.config.cron.xml_7814T08-2


Any suggestions on that? Code level? Something I am missing?


Best regards,

Andreas from Bremen, Germany

Comments

  • Pavel
    Pavel
    Hi,

    can you try it manually?

    su - lpar2rrd
    scp -i /home/stor2rrd/.ssh/id_rsa  lpar2rrd@192.168.201.51:/dumps/svc.config.cron.xml_7814T08-2 /home/lpar2rrd/stor2rrd/data/v5010/svc.config.cron.xml_7814T08-2

    can you check if /dumps/svc.config.cron.xml_7814T08-2  exist on the storage?


  • aklausing
    aklausing
    Hi,
    i will be able to access the system tomorrow morning 9 am (GMT+1). I will then try and update the post.

    Regards,
    Andreas
  • aklausing
    aklausing
    Hi,

    I tested your commands before opening the stor2rrd website again... and they work.
    After that I had a look at the monitoring dashboard ... and the V5010 is listed.

    Looking at the audit log of the storwize, it seems that at around 00:01 the system copied the necessary files:

    "18.01.18 00:01:06",admin,"satask cpfiles -prefix /dumps/svc.config.cron.*_7814T08-2 -source 01-2 01-1 ",

    And after that the lpar2rrd user started the stats intervall:

    "18.01.18 00:01:27",lpar2rrd,"svctask startstats -interval 5",

    Is this a behavior of the new storwize code or could that have happened with older code levels as well? I never saw this behavior before with a storwize storage. They sometimes need a minute ... but not hours.

    Regards,
    Andreas
  • Pavel
    Pavel
    Hi,

    I see for the first time, I have no explanation ...
    As per your previous logs xml file was not /dumps/svc.config.cron.xml_7814T08-2 file on the storage. Hard to say why ...
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion