Unity 450F not monitored

Hi,
I set up the connection to the array according to the instructions 
https://www.stor2rrd.com/EMC-PowerMax-VMAX-VNX-Unity-VPLEX-DataDomain-Isilon-XtremIO-CLARiiON-Celerra-monitoring.htm
and connection available.

But the data still does not go. There is no information about the array in the browser (ctrl+F5).

$ tail -7 /home/lpar2rrd/stor2rrd/logs/error.log

Tue Jun 25 10:06:19 2019: EMC-Unity: Can't open /home/stor2rrd/stor2rrd/data/EMC-Unity/config.html is missing (fresh install or upgrade?, then wait about 20mins) bin/LoadDataModule.pm:19921
Tue Jun 25 10:06:19 2019: EMC-Unity: Volumes cfg file has been found : /home/stor2rrd/stor2rrd/data/EMC-Unity/VOLUME/volumes.cfg ./bin/storage.pl:10665
Tue Jun 25 10:06:19 2019: EMC-Unity : Volumes not found! EMC UNITY is probably configured only for NAS (file). Skip graphs for volumes! ./bin/storage.pl:334
Tue Jun 25 10:06:19 2019: EMC-Unity : Volumes not found! EMC UNITY is probably configured only for NAS (file). Skip graphs for volumes! ./bin/storage.pl:346
Tue Jun 25 10:06:19 2019: Can't open /home/stor2rrd/stor2rrd/data/EMC-Unity/pool.cfg : No such file or directory : (ignore after fresh install) ./bin/storage.pl:9142
Tue Jun 25 10:06:19 2019: EMC-Unity: VOLUME cfg file has not been found : /home/stor2rrd/stor2rrd/data/EMC-Unity/VOLUME/volumes.cfg ./bin/storage.pl:10438
Tue Jun 25 10:06:19 2019: EMC-Unity: Can't open /home/stor2rrd/stor2rrd/data/EMC-Unity/config.html is missing (fresh install or upgrade?, then wait about 20mins) bin/LoadDataModule.pm:19921
Tue Jun 25 10:06:19 MSK 2019




Comments

  • Hi,

    1. stor2rrd version
    2. Unity formware version
  • Hi, Pavel
    stor2rrd - 2.52
    Unity - 4.5.1.0.5.001
  • ok, new storage firmware has different API output, use this as a fix


    -rwxrwxr-x 1 stor2rrd stor2rrd 96061 Jun 11 16:03 bin/unityperf.pl
    Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, stor2rrd owner)
    If your web browser gunzips it automatically then just rename it: mv unityperf.pl.gz unityperf.pl
    Assure that file size is the same as on above example

    It should come up in next 30 minutes.

  • Fine. Everything is working. Thank you very much! <span>:smile:</span>
Sign In or Register to comment.