SAN Cisco NX-OS(tm) m9700 switches display port speed wrong way stor2rrd (2.71 )

tomlee

SAN Cisco NX-OS(tm) m9700 switches display wrong port speed
stor2rrd (2.71 )  2.70 was OK

Software (m9700-sf3ek9-mz), Version 8.4(1a) 
stor2rrd ->

fc1-15

END HOST

-

21:00:34:80:0D:3C:80:68

PROD (10)

2000 Gbps

-

-

up

switch side 

-mds1a# show int fc1/15

fc1/15 is up

    Port description is END HOST

    Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)

    Port WWN is 20:0f:00:3a:9c:40:a0:00

    Admin port mode is F, trunk mode is off

    snmp link state traps are enabled

    Port mode is F, FCID is 0x0b0020

    Port vsan is 10

    Admin Speed is auto max 32 Gbps

    Operating Speed is 16 Gbps

logs uploaded

Regards
tomlee

Karel

Hi @tomlee,

you're right, there is a bug in 2.71 version. Use the following file as a fix.

https://download.stor2rrd.com/patch/sanperf.pl.gz

Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, stor2rrd owner)

-rwxr-xr-x 1 stor2rrd stor2rrd 123243 Apr  6 13:23 sanperf.pl

If your web browser gunzips it automatically then just rename it: mv sanperf.pl.gz sanperf.pl

After deploying:

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
rm tmp/*-conf-run

Configuration table should be refreshed till 10 minutes. Let us know, thanks.

tomlee

Great Thanks
issue resolved.

Regards
tomlee