Configuring CISCO SAN switch

PhilippeA

Hello,

I try to configure CICSCO SAN switch, but i have the following message :

Wed Aug 31 09:42:40 2016: Got authorizationError (access denied to that object) querying 10.76.xxx.xxx for sysDescr. /home/lpar2rrd/stor2rrd/bin/san_verify.pl:153 :

1) I have created the user snmpuser1

2) I have configured the file /home/lpar2rrd/stor2rrd/etc/san-list.cfg

SNMP_VERSION=3
10.76.xxx.xxx::CISCO:

3) I controll the result with "./config_check.sh"

Any idea ?

Best regards
Philippe

Pavel

configuration record should look like this:
10.76.xxx.xxx:snmpuser1:CISCO:

The try:
./bin/config_check.sh

PhilippeA

I have already try with 10.76.xxx.xxx:snmpuser1:CISCO: with the same result :

Wed Aug 31 11:26:12 2016: Got authorizationError (access denied to that object) querying 10.76.xxx.xxx for sysDescr. /home/lpar2rrd/stor2rrd/bin/san_verify.pl:153 :

Pavel

ok, as per my research we have not tried yet Cisco with v3 in our labs.
What will not work is snmp v3 with password authorization, this is not implemented yet. I am not sure if this is default for v3.

Can you test it with v2c for example?
snmpwalk -v 2c -c public 10.76.xxx.xxx 1.3.6.1.2.1.1.5
SNMPv2-MIB::sysName.0 = STRING: cisco01

PhilippeA

I have try :

snmpwalk -v 2c -c public 10.76.xxx.xxx 1.3.6.1.2.1.1.5
SNMPv2-MIB::sysName.0 = STRING: sw123

I have modified my san-list.cfg :

10.76.xxx.xxx::CISCO:

It's now all ok.

Thank...

Regards

Rustam

Hello! 

Another issue with connecting HP branded Cisco MDS.

Fresh deployment from XoruX-1.25-1-OVF.zip

Brocade switches are ok.

============

swtdv-106-11-04# show version

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html

Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software are covered under the GNU Public

License. A copy of the license is available at

http://www.gnu.org/licenses/gpl.html.

 

Software

  BIOS:      version 1.0.19

  loader:    version N/A

  kickstart: version 5.2(8)

  system:    version 5.2(8)

  BIOS compile time:       02/01/10

  kickstart image file is: bootflash:/m9100-s3ek9-kickstart-mz.5.2.8.bin

  kickstart compile time:  12/25/2020 12:00:00 [12/07/2012 19:48:00]

  system image file is:    bootflash:/m9100-s3ek9-mz.5.2.8.bin

  system compile time:     11/9/2012 11:00:00 [12/07/2012 20:47:26]

 

 

Hardware

  cisco MDS 8Gb Fabric Switch for HP Blade System c-Class Chassis ("1/2/4/8 Gbps FC/Supervisor-3")

  Motorola, e500v2  with 2076636 kB of memory.

  Processor Board ID JAF1814ABLS

 

  Device name: swtdv-106-11-04

  bootflash:    1001952 kB

Kernel uptime is 868 day(s), 1 hour(s), 17 minute(s), 0 second(s)

 

 

[lpar2rrd@xorux MIBs]$ tail ~/stor2rrd/logs/error.log

Tue Feb 21 17:33:05 2017: Could not find ports for swtdv-106-11-04 in /home/lpar2rrd/stor2rrd/data/swtdv-106-11-04/PORTS.cfg ./bin/san.pl:252

Tue Feb 21 17:35:19 2017: Could not find ports for swtdv-106-11-04 in /home/lpar2rrd/stor2rrd/data/swtdv-106-11-04/PORTS.cfg ./bin/san.pl:252

Tue Feb 21 17:35:46 2017: Could not find ports for swtdv-106-11-04 in /home/lpar2rrd/stor2rrd/data/swtdv-106-11-04/PORTS.cfg ./bin/san.pl:252

Tue Feb 21 17:36:06 2017: Could not find ports for swtdv-106-11-04 in /home/lpar2rrd/stor2rrd/data/swtdv-106-11-04/PORTS.cfg ./bin/san.pl:252

Tue Feb 21 17:38:12 2017: Could not find ports for swtdv-106-11-04 in /home/lpar2rrd/stor2rrd/data/swtdv-106-11-04/PORTS.cfg ./bin/san.pl:252

Tue Feb 21 17:40:07 2017: Could not find ports for swtdv-106-11-04 in /home/lpar2rrd/stor2rrd/data/swtdv-106-11-04/PORTS.cfg /home/lpar2rrd/stor2rrd/bin/san.pl:252

Tue Feb 21 18:00:07 2017: Could not find ports for swtdv-106-11-04 in /home/lpar2rrd/stor2rrd/data/swtdv-106-11-04/PORTS.cfg /home/lpar2rrd/stor2rrd/bin/san.pl:252

 

[lpar2rrd@xorux MIBs]$ snmpwalk -v 2c -c public2 10.247.15.82 1.3.6.1.2.1.1.5

SNMPv2-MIB::sysName.0 = STRING: swtdv-106-11-04

 

[lpar2rrd@xorux MIBs]$ grep 82 ./etc/san-list.cfg

10.247.15.82:public2:CISCO:SD

 

 

[lpar2rrd@xorux stor2rrd]$ ./bin/config_check.sh

=========================

SWITCH: 10.247.15.82

=========================

Type         : CISCO

DestHost     : 10.247.15.82

Version SNMP : 2c

Community    : public2

SNMP port    : not defined! Used SNMP default port "161"!

Switch name  : swtdv-106-11-04

STATE        : CONNECTED!

 

[lpar2rrd@xorux MIBs]$ ls -l ./data/swtdv-106-11-04/

-rw-r--r-- 1 lpar2rrd lpar2rrd 335 Feb 21 18:07 config.cfg

-rw-r--r-- 1 lpar2rrd lpar2rrd  53 Feb 21 18:10 fabric.txt

-rw-r--r-- 1 lpar2rrd lpar2rrd   0 Feb 21 18:10 PORTS.cfg

-rw-r--r-- 1 lpar2rrd lpar2rrd 180 Feb 21 17:36 swtdv-106-11-04_sanperf_20170221_1736.out.tmp

--trimmed--

-rw-r--r-- 1 lpar2rrd lpar2rrd 180 Feb 21 18:10 swtdv-106-11-04_sanperf_20170221_1810.out.tmp

-rw-r--r-- 1 lpar2rrd lpar2rrd   0 Feb 21 18:10 vsan.txt

 

 

Karel

Hello,

can you try these commands?

snmpwalk -v 2c -c public2 10.247.15.82 1.3.6.1.2.1.31.1.1.1.1 >ifAlias.txt

snmpwalk -v 2c -c public2 10.247.15.82 1.3.6.1.2.1.31.1.1.1.10 >ifHCOutOctets.txt

snmpwalk -v 2c -c public2 10.247.15.82 1.3.6.1.2.1.31.1.1.1.11 >ifHCOutUcastPkts.txt

Send us outputs via https://upload.stor2rrd.com

Rustam

Hi Karel,
collected and uploaded.
Looks normal, hmm...