AIX LPAR, all vscsi adapters not showing on agent 7.00-1

DeanC

Hi any news on a fix for this? 

        $adapter_values = "$name,$bytes_sec,$io_sec,$bytes_sec_read,$bytes_sec_write";
      } ## end if ( $adapter_name =~ ...)
    } ## end if ( $type =~ /^Adapter|^Vadapter/...)
print "*******  ADA00  $adapter_name \n\n\n";
    if ( $line =~ /^hdisk/ && $adapter_name =~ /^fcs|^vscsi|^sissas|^sisi/ ) {
      $line =~ s/\s+/,/g;

print "*******  ADA  $adapter_name \n\n";
##################################################################################
print "*******  $line \n\n\n\n\n";

*******  ADA00

*******  ADA00

*******  ADA00  vscsi1

*******  ADA00  vscsi1

*******  ADA00  vscsi0

*******  ADA00  vscsi0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk3,0.0,18.0K,0.0,18.0K,68.3,0.2,2.3,0.4,6.9,0,0,0.0,0.8,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk4,0.0,22.1K,0.0,18.0K,4.2K,0.2,2.4,0.4,6.9,0,0,0.9,1.2,0.0,0.0,0,0,0.2,0.0,0.1,0.0,0.0,0.3

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk10,0.0,13.1K,0.0,12.9K,204.8,0.2,1.5,0.4,3.7,0,0,0.1,1.2,0.0,0.0,0,0,0.0,0.0,0.0,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk6,0.0,18.0K,0.0,18.0K,68.3,0.2,2.1,0.4,5.4,0,0,0.0,0.7,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk2,0.0,74.1K,0.0,74.1K,0.0,0.4,2.6,0.4,7.6,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk5,0.0,964.3,0.0,964.3,0.0,0.2,0.6,0.4,2.1,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.0,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk9,0.0,18.0K,0.0,18.0K,0.0,0.2,2.2,0.4,6.9,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk8,0.0,18.0K,0.0,18.0K,0.0,0.2,2.9,0.4,7.6,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk0,0.2,33.5K,0.0,18.0K,15.5K,0.2,2.0,0.4,5.2,0,0,3.4,1.3,0.7,21.4,0,0,0.1,0.0,0.1,0.0,0.0,0.3

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk7,0.1,18.0K,0.0,18.0K,0.0,0.2,2.9,0.4,7.4,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

*******  ADA00  vscsi0

*******  ADA  vscsi0

*******  hdisk1,0.0,18.0K,0.0,18.0K,68.3,0.2,2.0,0.4,5.2,0,0,0.0,0.9,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

Pavel

Hi,

what is wrong here? montoring of vscsi on AIX works fine generally, at least in our labs

DeanC

we have two vscsi on the lpar they are set up with alternate priority so they are both being used.

hdisk0 vscsi0=1 vscsi1=2
hdisk1 vscsi0=2 vscsi1=1

But it only sending data for vscsi0

9117:nim21:15:1609323392:Wed Dec 30 10:16:32 2020 version 7.00-1:3808000000|4:nim21:0::mem:::50331648:19736072:30595576:2001368:0:5750940:pgs:::0:0:16384:0:::lan:en0:10.84.48.229:562970005931:447807852710:152738265:425756091:::ame:::010226::::cpu:::0:9:27:0:::san:vscsi0::231964.3:27409.7:2.4:5.5:::san_resp:vscsi0::2.1:1.0:::::queue_cpu_aix:::2.2:8:0:0:0:


When I look at the lpars in lpar2rrd there is only data for vscsi0

vscsi0

0.28

9.20

0.47

5.77

Pavel

Hi,

it is a know issue on AIX, iostat reporting it bad, we summarize hdisk traffic from this output:

iostat -Dsal 60 1

This APAR aparently fixes it: https://www.ibm.com/support/pages/apar/IJ20703

DeanC

OK thank you.