Comments
-
Hi, perhaps a silly question, but is it ok to remove the rule from load.sh/load_vmware.sh which checks if previous instance is still running so the next run will start no matter what? We've tried that and so far it is running fine with no gaps. Can we expect any side effects? Thanks.
-
Hi, ok, I will give it a try. First I will crank up the _PARALLEL_RUN value. 250 seems quite like a big difference, that might help. But what about our CPU/RAM setup, is it ok for such environment please? As for the version - we have 6.16 which I've downloaded a week ago (26.5.) from your download section. If it persists…
-
Hello Pavel, sorry for my delayed response: thank you for your suggestions. Finally I had a chance to work on a problem again and upgraded the lpar2rrd (6.16) but with no improvement. Could be we just simply don't have enough resources...? We have almost 3k LPARs (70 HMCs) and over 20k VMs (30 vCenters) and our lpar2rrd…
-
Hello, we have a same issue here (version 6.02). VMware data are dropping (missing every 2nd hour) because the load.sh does not finish within a hour. Most likely the cause is higher number of VMs (5000+) belonging to a one of the VCENTERs. Is there some workaround or 5000+ VMs per VCENTER is simply too much please?…
Howdy, Stranger!