Comments
-
Yes, it is VNXe 1600 and it is working fine. The only problem is the test connection error from the UI. The error is as follow:uemcli command failed: Operation failed. Error code: 0x1000002 The system encountered an unexpected error. Record the error code and go to the EMC Online Support As I mentioned, when I use…
-
It works. Thank you.
-
-
When you set only one pool (FC_r1) , for only IO total from 06-29 to 06-30, it shows nothing. I attached the screenshot.
-
OK, thanks.
-
Yes. the time is not right.
-
The graphs are become correct. But in the health status table, the time is still wrong.
-
At first it was wrong, then we set ntp server on the storage. Shall we delete the storage on stor2rrd and define it again?
-
HelloI have the same problem on V300R003C20. The last date update is wrong and so the graphs are not shown correctly. Did you reach to a solution for this problem?
-
Thank you.
-
I think maybe for one or two years.
-
Thank you.
-
Hi again, Is this the main.js for lpar2rrd section? Because the mirroring is in the stor2rrd section. So the main.js for the stor2rrd should be fixed.
-
Thanks
-
It works. Thank you very much.
-
OK, thanks.
-
Even when I chose 1 VM, it did the same. I tried with more than 9 VMs also, but still it was shown 9.
-
OK. Thank you very much.
-
I uploaded the log files. The requested screenshots are attached
-
Yes, the graphs generated normally by GUI contains data, but the graphs generated by Reporter at the same time are empty.
Howdy, Stranger!