elmmare

As a better reference: https://community.ibm.com/community/user/power/blogs/pete-heyrman1/2022/01/25/understanding-processor-utilization-on-powervm

You're right: CPU cycles allocated to LPARs by the hypervisor are accounted for CPU usage in EP2.0. If you go over the prepaid CPU cores available in the pool you enter in the "paid per use zone" (and you pay for idle cycles too.) Moreover, idle cycles are not availbale for sharing with othe LPAR (having a lot of idle is…

yes, you are right.

CMC Capacity monitoring application it's not related to the EP2.0 and report CPU utilization (allocation - idle): In the same interval LPAR2RRD reports CPU allocation as follow: CMC Enterprice Pool 2.0 report the same value of LPAR2RRD (accounted for "pay per use" on the whole pool) (we have only istantaneous value for…

Hi, it works fine. thank you.

Please note that only "Virtual Fabric enabled" swithes are affected while other switches work fine.

Hi, Encrypt & Compress are ok but we lost a lot of other information: Alias/Speed/STat/Physical status/host WWN.

Hi, yes, it is the same as Friday.

HI, it dosen't work: Encrypt and Compress coulumn are still not populated for VF:99 (not principal switch).

logs uploaded

snmpwalk uploaded. Compression enbaled on port0 (VF:128) and port4(VF:99).

Hi, it works fine and shows up the right ISL ports counts. Please note that Encrypt and Compress coulumn are still not populated for the not principal switch (as showned in the pictures attached a couple of days ago). It's not important for my use case but could be important for someone else. Let me know if you need other…

Hi, logs.tar has been uploaded yesterday.

Hi, Patch has been applied to stor2rrd version 7.60 ISL count on VF is now ok but there are too many ISL counted on the chassis. It seem that ISL are counted twice on the principal VF. Global configuration: SWITCH1 configuration: SWITCH2 configuration: ISL: Thank you for your help and attention.