Miguel

Ready Pavel. Thanks

All right. I get it! We need to RST again the complete library? RSTLIB SAVLIB(LPAR2RRD) DEV(*SAVF) SAVF(QGPL/C_RTVSTS) 
 MBROPT(*ALL) ALWOBJDIF(*ALL) ???

No connection by telnet

This is the support 3 >> PING RMTSYS ('172.19.149.175')
 Verifying the connection to the host 172.19.149.175.
 There has been no response from the main system within 1 second
 for the 1st verification of the connection.
 There has been no response from the main system within 1 second
 for the 2nd…

I did the test with following results: From Power PING RMTSYS('LPAR2RRD-SERVER.SERVER.COM') No successfully TELNET RMTSYS('LPAR2RRD-SERVER.SERVER.COM') PORT(8162) RMTUSER(TESTSTRING) INZWAIT(15) No suceesfully. I did ping from command prompt console (My PC) and was suceesfully. Where i check whats the problem?

Pavel, the error persists Er: C_SNDSTS - connect() errno = 3447 Use of uninitialized value $secs in addition (+) at /home/lpar2rrd/lpar2rrd/bin/lpar2rrd-daemon.pl line 4217 We don't have communication the agent with server. Ping to server no response.

Hi Pavel 1. PING RMTSYS('LPAR2RRD-SERVER.SERVER.COM') No ha habido respuesta del sistema principal en el plazo de 1 segundos para la 1ª verificación de la conexión. No ha habido respuesta del sistema principal en el plazo de 1 segundos para la 2ª verificación de la conexión. No ha habido respuesta del sistema principal en…

Thanks

Pavel I have a question about historical report on lpar2rrd, specifically on THREADS at the level of SHRPOOL. This current number of threads by shrpool can see like max jobs entries for subsystem assigned to shrpool? Or you have any form to see max jobs entries carried out for a subsysten in specific?

Yes and it works

Pavel we have this error on joblog SND_SYSSTS IF: C_SNDSTS - protocol 5.1 UTF8 conv IF: C_SNDSTS - connection Established() WR: C_SNDSTS frame not sent 201 ( WR: C_SNDSTS frame not sent 201 ( WR: C_SNDSTS frame not sent 201 ( WR: C_SNDSTS frame not sent 201 ( WR: C_SNDSTS frame not sent 201 ( The comunication is ok

I did that and it's working sucessfully. Thanks. Let me check tomorrow with the another partition that it can´t connect to the server.

Hi Pavel, I am still checking the point of connection. I will notify any restlessness. However, I updated the agent in another partition, we have the same trouble, it didn´t show succesfully connection in the log of sns_sts job. I restored the c_rtvsts pgm that you sent me and now it´s presenting this error: IF: C_SNDSTS -…

Hi, The ip server is included in our routing tables. It doesn't cross throw firewall. The packages don´t get out from the OS400. Don't get it to our switch core. My question is: Why do one lpar work fine and another not, if they are in the same power? Can I check anything in the server? I don´t know. A traceroute for…

From especific and only one ibm i lpar I can´t establish connection with the server. The rest of partition´s have comunication sucessfully! In other words, I do a ping or telnet to ip server and no have answer. Department of network and security don't have any alerts about that. Is posible view any log or something that…

Morning Pavel. With restore it works. It gets connected. Now, I still have trouble with a partition, who doesn´t get connection throw ping and telnet. Security and network department dont have any alerts about that. It leaved to work after an ipl. I could try this methods and prove it (update to v 1.1.1 and restore the…

No work lpar2rrd agent, with suggested changes applied. Same status de not conection Pavel. Al rigeht, I will hope the fix.

Files sended.

Yes, both are running. I did the same with another partition & was ok. Here the joblog ********************************************************************* CALL PGM(C_RTVSTS) PARM(60 99 X'000100000003FFFFD5404040000A000000030000D5 404040000A00000003FFFFD5404040000A00000003FFFFD5404040000A000000030000D540 4040000A0000'…

The last message is this: IF: C_SNDSTS - protocol 5.1 UTF8 conv I refresh with F5 and nothing?

I validated with security department and no exist any block for user or ip address. At the network level the package or petition don't pass to the default gateway, in other words, it doesn't out of the os400.

I am validating this it. Is that correct in the server? lpar2rrd:/home/lpar2rrd/lpar2rrd/logs # netstat -an |grep 8162tcp 0 0 0.0.0.0:8162 0.0.0.0:* LISTENtcp 0 0 172.19.149.175:8162 172.19.131.6:65267 CLOSE_WAIT

With another lpar with same version in the same power it works succesfully. Can you help me in determinate the problem, i can provide some log´s or anything that allows me what is the issue?

Equal failure

Morning Pavel. I executes the TELNET and fail in 5 seconds. Mensaje . . . . : No se ha obtenido respuesta del sistema principal remoto dentro del tiempo de espera de apertura.

 CALL PGM(C_SNDSTS) PARM('172.19.149.175' '8162' X'0001D740404040C9C4F0F0F0 C340404040F1F7F24BF1F94BF1F4F94BF1F7F5' 'PH_DTAQRCV*LIBL' 'PH_DTAQSND*LIBL ' 'PH_USRSPC *LIBL' '*UTF8' 1 'N' '/home/LPAR2RRD') IF: C_SNDSTS - protocol 5.1 UTF8 conv Er: C_SNDSTS - connect() errno = 3447 Er: C_SNDSTS - connect() errno = 3447 Er:…

I executed this command and leave it running for more 30mins at least. : tcpdump -v -ni eth0 host <ip agent ibm i> > outfile.txt and no have any data in outfile.txt After I see this in error.log-daemon lpar2rrd:/home/lpar2rrd/lpar2rrd/logs # more error.log-daemonUse of uninitialized value $mins in multiplication (*) at…

how can i validate in the server the correct name hostname of the agent ibm i?

it was working until the last week, its not a new installation The last weekend I apllied an ipl to the power.

tcp 0 0 0.0.0.0:8162 0.0.0.0:* LISTEN tcp 0 0 172.19.149.175:8162 172.19.148.56:11102 ESTABLISHED tcp 0 0 172.19.149.175:8162 172.16.12.5:51926 ESTABLISHED tcp 0 0 172.19.149.175:8162 172.15.50.4:58023 ESTABLISHED tcp 0 0 172.19.149.175:8162 172.15.50.30:23388 ESTABLISHED