Dimon

Hi.Everything works great!Thanks!

the command "./load.sh html" didn't help one SAN-switch not in correct fabric Logs uploaded.

Added according to the instructions above. 



But one SAN-switch did not get into the factory, although the settings are correct. 



Device
-> SAN -> SAN-switch o*****sw-b2 and o*****sw-b has the same Fabric name:
O*****ric_B 

How to fix it? 



Logs…

I will remove all SAN switches (https://stor2rrd.com/how_to_remove_storage.php). 

Installed
patches (san.pl.gz и sanperf.pl.gz) 

Added one
switch and no data appeared in half a day (reboot and CTRL+F5 did not help) 

After that
I downloaded and installed the update…

Hi, 

I have a
virtual fabric on my SAN switch. 

I found
forum post https://forum.xorux.com/discussion/163/virtual-fabric-switch-entry-not-appearing 

According
to the description, I need to create a user for each VF and add it as a
separate SAN switch? 


Switching to SNMP v3 didn't give anythin.All switches are configured identically, the connection to all is carried out normally. I noticed that data on ports is not collected, and there is nothing at all for non-porous ones.

Hi!Yes the same error message.logs file sent to upload.