EMC VNX 5200 - Cannot install NaviCLI-Linux-32-x86-en_US-7.30.15.0.44-1.i386.rpm
Hi folks,
I tried to add my EMC VNX 5200 to stor2rrd with the virtual appliance but I am blocked here and have no solution :
Is there a way to install it ? In principle, virtual appliance should contain all dependencies ?
I tried to add my EMC VNX 5200 to stor2rrd with the virtual appliance but I am blocked here and have no solution :
[root@VIRMoSAN01 ~]# rpm -i NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64.rpm
error: Failed dependencies:
libc.so.6 is needed by NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64
libc.so.6(GLIBC_2.0) is needed by NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64
libc.so.6(GLIBC_2.1) is needed by NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64
libc.so.6(GLIBC_2.3) is needed by NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64
libdl.so.2 is needed by NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64
libdl.so.2(GLIBC_2.0) is needed by NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64
libdl.so.2(GLIBC_2.1) is needed by NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64
Is there a way to install it ? In principle, virtual appliance should contain all dependencies ?
Comments
-
Hi,
I have just tried it, it is ok with the same package.
What is your appliance version? It is noted on the bottom of its root web page:
open web page http://<your hostaname>/
[root@xorux]# rpm -i NaviCLI-Linux-64-x86-en_US-7.30.15.0.44-1.x86_64.rpm
Please enter the verifying level(low|medium|l|m) to set?
l
Setting low verifying level
root@xorux]# rpm -qa| grep libgcc
libgcc-4.8.5-4.el7.x86_64
libgcc-4.8.5-4.el7.i686
-
Hi thanks for your response :[root@VIRMoSAN01 ~]# rpm -qa| grep libgcclibgcc-4.8.3-9.el7.x86_64
I was in 1.30 and upgraded yesterday to last version 1.35-1 -
Ok I found the issue.
We need to insall
yum install glibc-utils.x86_64 compat-glibc-headers.x86_64 glibc.i686
-
I well, I think that this oneis missing at your appliance
yum install glibc.i686
-
BTW what is youir appliance version:
grep "Virtual Appliance version" /var/www/html/index.html| sed -e 's/^.*Virtual Appliance version/Virtual Appliance version/' -e 's/is brought to you by.*//'
Looks like you have older appliance when there was not support for VNX yet.
-
Yes it is. So I have to instlal glin utils.
-
Sorry glib utils.
-
is it working with installed glibc.i686?
It is something what helped in this thread and it is a difference between your version of the appliace and the actual one
https://rodrigotamada.wordpress.com/2012/08/20/oracle-linux-install-emc-powerpath-naviagent-on-oracle-linux-6/
Howdy, Stranger!
Categories
- 1.6K All Categories
- 36 XORMON NG
- 25 XORMON
- 146 LPAR2RRD
- 12 VMware
- 15 IBM i
- 2 oVirt / RHV
- 4 MS Windows and Hyper-V
- Solaris / OracleVM
- XenServer / Citrix
- Nutanix
- 6 Database
- 2 Cloud
- 10 Kubernetes / OpenShift / Docker
- 121 STOR2RRD
- 18 SAN
- 7 LAN
- 17 IBM
- 3 EMC
- 12 Hitachi
- 5 NetApp
- 15 HPE
- Lenovo
- 1 Huawei
- 1 Dell
- Fujitsu
- 2 DataCore
- INFINIDAT
- 3 Pure Storage
- Oracle