New installation with appliance

isalcedo
isalcedo
in SAN 
Hello, everyone:

First of all, please excuse me for my English, it is not my language.

I have installed the appliance with the STOR2RRD and I have it working with an EQUAL LOGIC but I cannot get the SAN Brocade switches to work correctly. 

The models are 5100 with VF and 6510. I have followed all the steps but I can't get the tests to work or show data. I need any help

Example: 

192.168.72.135 IP Appliance
192.168.80.143 IP Brocade


Comments

  • isalcedo
    isalcedo

    Example configuration:

    SANswitch:admin> snmpconfig --show snmpv1


    SNMPv1 community and trap recipient configuration:

     Community 1: Secret C0de (rw)

       No trap recipient configured yet

     Community 2: OrigEquipMfr (rw)

       No trap recipient configured yet

     Community 3: private (rw)

       No trap recipient configured yet

     Community 4: public (ro)

       No trap recipient configured yet

     Community 5: common (ro)

       No trap recipient configured yet

     Community 6: FibreChannel (ro)

       No trap recipient configured yet

    SNMPv1:Enabled

    SANswitch:admin> snmpconfig --show accessControl


    SNMP access list configuration:

    Entry 0: Access host subnet area 192.168.72.135 (rw)

    Entry 1: No access host configured yet

    Entry 2: No access host configured yet

    Entry 3: No access host configured yet

    Entry 4: No access host configured yet

    Entry 5: No access host configured yet

    SANswitch:admin> snmpconfig --show seclevel

    GET security level = 0, SET level = 0

    SNMP GET Security Level: No security

    SNMP SET Security Level: No security

    SANswitch:admin>

  • isalcedo
    isalcedo

    [lpar2rrd@stor2rrdpro stor2rrd]$ ./bin/config_check.sh 192.168.74.18

    =========================

    SWITCH: 192.168.74.18

    =========================

     UDP connection to "192.168.74.18" on port "161" is ok


    san_verify.pl:

    Thu May 19 09:13:05 2022: Got Timeout querying 192.168.74.18:161 with public for sysName. /home/stor2rrd/stor2rrd/bin/SNMP_lib.pm:1292 :

    snmpwalk -v 2c -c 'public' 192.168.74.18 1.3.6.1.2.1.1.5

    SNMP version : 2c (default)

    Port         : 161 (default)

    Timeout      : 5 seconds

    Community    : public

    STATE        : NOT CONNECTED!

     connection failed!!

     Check network connectivity and user access



    No LAN configured :

    [lpar2rrd@stor2rrdpro stor2rrd]$

Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion