Problem to configure Cisco MDS

stg_proj

May 2021 in SAN

Hi,
i have a problem to configure a MDS cisco, this is the problem log,

"API host network connection: UDP connection to xx.xxx.xx.xx:161 is OK

Crontab test: OK

API authorization: NOK

Wed May  5 12:38:21 2021: Got Timeout querying xx.xxx.xx.xx:161 with public for sysName. /home/lpar2rrd/stor2rrd/bin/SNMP_lib.pm:1068 : 

/usr/bin/snmpwalk -v 2c -c public xx.xxx.xx.xx 1.3.6.1.2.1.1.5

SNMP version  : 2c (default)

Port          : 161 (default)

Timeout       : 5 seconds

Community     : public

STATE         : NOT CONNECTED!"

have you any doc or idea for configure a MDS Cisco?

regards

Comments

• 

  Pavel

  May 2021

  Hi,

  
  

  I suppose this does not work:

  /usr/bin/snmpwalk -v 2c -c public xx.xxx.xx.xx 1.3.6.1.2.1.1.5

  
  

  it could be about switch setup, follow this: https://stor2rrd.com/install.php#SAN

  
  

  Is that only switch whic does not work? have you tried others?
  

  
  
• 

  stg_proj

  May 2021

  Hi,
  yes snmpwalk doesn't work:
  

  /usr/bin/snmpwalk -v 2c -c public xxx.xxx.xxx.xxx 1.3.6.1.2.1.1.5

  Timeout: No Response from xxx.xxx.xxx.xxx
  
  
  
  

  show snmp community

  Community             Group / Access      context    

  _________             ______________      _______    

  public                network-operator             
  
  
  
  

  ./bin/config_check.sh xxx.xxx.xxx.xxx 

  
  =========================
  

  SWITCH: xxx.xxx.xxx.xxx

  =========================

    UDP connection to "xxx.xxx.xxx.xxx" on port "161" is ok

  
  

  san_verify.pl:

  Mon May 17 16:53:43 2021: Got Timeout querying xxx.xxx.xxx.xxx:161 with public for sysName. /home/lpar2rrd/stor2rrd/bin/SNMP_lib.pm:1068 : 

  snmpwalk -v 2c -c public xxx.xxx.xxx.xxx 1.3.6.1.2.1.1.5

  SNMP version  : 2c (default)

  Port          : 161 (default)

  Timeout       : 5 seconds

  Community     : public

  STATE         : NOT CONNECTED!

    connection failed!!

    Check network connectivity and user access

  
  

  
  

  No LAN configured : 

  
  
  

  perl /home/stor2rrd/stor2rrd/bin/conntest_udp.pl xxx.xxx.xxx.xxx 161

    UDP connection to "xxx.xxx.xxx.xxx" on port "161" is ok
  
  
  I have other MSD cisco configured and works, but i didn'install them
  
  regards

  
  
• 

  stg_proj

  May 2021

  Hi,
  have you any news about my issue?
  
  regards
• 

  Pavel

  May 2021

  Hi
  

  
  

  this must work:

  /usr/bin/snmpwalk -v 2c -c public xx.xxx.xx.xx 1.3.6.1.2.1.1.5

  
  

  Check it on your other MDS.

  Compare settings of them, SNMP, access list ...
  

  
  

Sign In or Register to comment.