AIX LPAR, all vscsi adapters not showing on agent 7.00-1

DeanC · December 2020

Hi any news on a fix for this?

        $adapter_values = "$name,$bytes_sec,$io_sec,$bytes_sec_read,$bytes_sec_write";
      } ## end if ( $adapter_name =~ ...)
    } ## end if ( $type =~ /^Adapter|^Vadapter/...)
print "******* ADA00 $adapter_name \n\n\n";
    if ( $line =~ /^hdisk/ && $adapter_name =~ /^fcs|^vscsi|^sissas|^sisi/ ) {
      $line =~ s/\s+/,/g;

print "******* ADA $adapter_name \n\n";
##################################################################################
print "******* $line \n\n\n\n\n";

******* ADA00

******* ADA00 vscsi1

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk3,0.0,18.0K,0.0,18.0K,68.3,0.2,2.3,0.4,6.9,0,0,0.0,0.8,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk4,0.0,22.1K,0.0,18.0K,4.2K,0.2,2.4,0.4,6.9,0,0,0.9,1.2,0.0,0.0,0,0,0.2,0.0,0.1,0.0,0.0,0.3

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk10,0.0,13.1K,0.0,12.9K,204.8,0.2,1.5,0.4,3.7,0,0,0.1,1.2,0.0,0.0,0,0,0.0,0.0,0.0,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk6,0.0,18.0K,0.0,18.0K,68.3,0.2,2.1,0.4,5.4,0,0,0.0,0.7,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk2,0.0,74.1K,0.0,74.1K,0.0,0.4,2.6,0.4,7.6,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk5,0.0,964.3,0.0,964.3,0.0,0.2,0.6,0.4,2.1,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.0,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk9,0.0,18.0K,0.0,18.0K,0.0,0.2,2.2,0.4,6.9,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk8,0.0,18.0K,0.0,18.0K,0.0,0.2,2.9,0.4,7.6,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk0,0.2,33.5K,0.0,18.0K,15.5K,0.2,2.0,0.4,5.2,0,0,3.4,1.3,0.7,21.4,0,0,0.1,0.0,0.1,0.0,0.0,0.3

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk7,0.1,18.0K,0.0,18.0K,0.0,0.2,2.9,0.4,7.4,0,0,0.0,0.0,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

******* ADA00 vscsi0

******* ADA vscsi0

******* hdisk1,0.0,18.0K,0.0,18.0K,68.3,0.2,2.0,0.4,5.2,0,0,0.0,0.9,0.0,0.0,0,0,0.0,0.0,0.1,0.0,0.0,0.0

Pavel · December 2020

Hi,

what is wrong here? montoring of vscsi on AIX works fine generally, at least in our labs

DeanC · December 2020

we have two vscsi on the lpar they are set up with alternate priority so they are both being used.

hdisk0 vscsi0=1 vscsi1=2
hdisk1 vscsi0=2 vscsi1=1

But it only sending data for vscsi0

9117:nim21:15:1609323392:Wed Dec 30 10:16:32 2020 version 7.00-1:3808000000|4:nim21:0::mem:::50331648:19736072:30595576:2001368:0:5750940:pgs:::0:0:16384:0:::lan:en0:10.84.48.229:562970005931:447807852710:152738265:425756091:::ame:::0

10226::::cpu:::0:9:27:0:::san:vscsi0::231964.3:27409.7:2.4:5.5:::san_resp:vscsi0::2.1:1.0:::::queue_cpu_aix:::2.2:8:0:0:0:

When I look at the lpars in lpar2rrd there is only data for vscsi0

vscsi0

0.28

9.20

0.47

5.77

Pavel · December 2020

Hi,

it is a know issue on AIX, iostat reporting it bad, we summarize hdisk traffic from this output:

iostat -Dsal 60 1

This APAR aparently fixes it: https://www.ibm.com/support/pages/apar/IJ20703

DeanC · December 2020

OK thank you.

AIX LPAR, all vscsi adapters not showing on agent 7.00-1

Comments

Howdy, Stranger!

Categories

In this Discussion