Custom Group empty (2.40/SAN/BNA)

Hexxer
Hexxer
edited October 2018 in STOR2RRD
Hi,

i installed it from scratch (free version) and it works great with BNA. All ports ar shown and so on.
BUT: I try to build a custom group. One Switch, 2 Ports...thats it. Save, wait......

Port itself get data. If i try to load the custom group the page went empty. Only the custom group name ist display. No graphs, nothing. 

Any ideas? Its a red hat and, as i say, if i look at the ports under the switch everything is fine.
I try reboots, reload, Chrome, FF, IE . 

regards

Comments

  • Hexxer
    Hexxer
    Courious. On an other install from a friend (other location) i can click the custom groups. Here i cant. I can click "Config" and all the other things in the menu, but "ISL" did not work. 
    Name dosent care, all other names/groups did also not work. 

  • Pavel
    Pavel
    Hi,

    we see the problem and can reproduce it at us (sqares used for alias cause a problem).
    We will provide you a fix today/tomorrow ...
  • Hexxer
    Hexxer
    edited October 2018
    Sound pretty good. Thanks

    An updates older version are working pretty good after the update. Guess "some" old file need for this ^^
  • Pavel
    Pavel
    edited October 2018
    1. Install this patch

    Download the patch file, untar it and install as the owner of STOR2RRD installation:
    Download link: http://download.stor2rrd.com/patch/stor2rrd-2.40-04.tar

    su - stor2rrd
    tar xvf stor2rrd-2.40-04.tar
    cd stor2rrd-2.40-04
    ./install.sh

    cd /home/stor2rrd/stor2rrd
    ./load.sh

    refresh the GUI when it finishes (Ctrl-F5)

    2. edit etc/web_config/custom_groups.cfg  and either remove all lines which contain squares [] or place in front of them backslash like in this example:
    SANPORT:.*BNA.*:2-0 \[ISL_brocade01-BNA_2_0\]:group1

    ./load.sh custom

    Ctrk-F5 in the GUI




  • Hexxer
    Hexxer
    Will do this tomorrow. Thx
  • Hexxer
    Hexxer
    Here we go. It works. Problm is gone.
    Regards
  • Hexxer
    Hexxer
    Just a question after a while. After some month i cant set custom groups. Is that right so? 

    VOLUME:sys1:00\:70\:74:clusterX
    VOLUME:sys1:00\:70\:75:clusterX
    VOLUME:sys2:00\:70\:74:clusterX
    VOLUME:sys2:00\:70\:75:clusterX

    The custom group is empty. SAN works perfect with custom groups. Its hitachi

  • Pavel
    Pavel
    format looks good, any error during
    ./load.sh custom
  • Hexxer
    Hexxer
    edited May 2020
    Looks like...Custom did not see the custom group. Sorry for blanking. F2 = Custom_Group2. Then comes a group ending with **00. No line from the Custom group with the luns. 

    creating custom: ****-F2:loss_sync:w
    creating custom: ****-F2:loss_sync:m
    creating custom: ****-F2:loss_sync:y
    creating custom: ****-F2:loss_sync-trend:y
    Finished       : Wed May 27 07:13:42 2020, run time: 0 secs
    start time html: Wed May 27 07:13:42 CEST 2020
    installing WWW : install-html.sh


  • Pavel
    Pavel
    Send us logs.
    Note a short problem description in the text field of the upload form.

    cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir

    tar cvhf logs.tar logs tmp/*txt etc/web_config/custom_groups.cfg

    gzip -9 logs.tar

    Send us logs.tar.gz via https://upload.stor2rrd.com

Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion