Wrong values on data read from storage VSP G800

bitdcc
bitdcc
in Hitachi

Guys

We are using Stor2rrd ver2.52 (last available) and we have Hitachi VSP800 (firmware 83-05-29/00) configured there.

When looking at the POOL read data: last day, we are seeing values completly different from the storage managment software (Command Device).

The difference is about 2GBps between both applications. (see both pictures)

Can you please advise us with the following issue?


regards,

Bit

Comments

  • Lukas
    Lukas
    Hello,

    1. Pls check this setup http://www.stor2rrd.com/Hitachi-VSPG-VSP-HUS-AMS-monitoring.htm --> Allow monitoring of CU and WWN

    2. send us logs and IOSTATS for affected storage.

    cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir

    tar cvhf logs.tar logs tmp/*txt data/<storage name>/IOSTATS/*

    gzip -9 logs.tar

    note

    where <storage_name> is name affected storage

    Send us logs.tar.gz via https://upload.stor2rrd.com

    You might even attach screenshots when it helps in understanding of the issue.

    Thank you
  • mdainotti
    mdainotti
    Hi, I am tring to add my Hitachi G800 storage to stor2rrd, I receive timeout error.
    Can you please show me your configuration file /etc/horcm1.conf ?
    for example i have:
    Hitachi Device Manager Storage Navigator IP 10.10.10.1
    2 nodes CTL1 10.10.10.20
    CTL2 10.10.10.30

    Is it right to configure file in this way ?

    HORCM_MON
    # ip_address service poll(10ms) timeout(10ms)
    localhost    11001   1000       3000
    HORCM_CMD
    # dev_name dev_name dev_name
    \\.\IPCMD-10.10.10.20-31001   \\.\IPCMD-10.10.10.30-31001

    Or I have to put somewhere the IP of DeviceManager 10.10.10.1 ?

    many thanks.
  • Lukas
    Lukas
    hello,

    Did you follow our documentation?

    https://www.stor2rrd.com/Hitachi-VSPG-VSP-HUS-AMS-HNAS-monitoring.htm

    The /etc/horcm1.conf file looks ok. Send us these logs:

    cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir

    tar cvhf logs.tar /HORCM/log1/* /etc/horcm1.conf

    gzip -9 logs.tar

    Send us logs.tar.gz via https://upload.stor2rrd.com

    You might even attach screenshots when it helps in understanding of the issue.

    Thank you
  • mdainotti
    mdainotti
    Hi, I sent you data many thanks
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion