There is no performance data from one of the two NetApp storage

zsoltesz · May 2019

Hi,

I have configured two NetApp storage in stor2rrd. One of them seems good (NetApp Release 8.3.1P2), but in the other one I can't see the performance data (NetApp Release 9.5P3). Some configuration data is also not visible (for example teh nodes or ports). I think I configured the two storages in the same way.

What could be the problem?

Regards,
Zoli

Pavel · May 2019

hi,

logs

Note a short problem description in the text field of the upload form.

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
tar cvhf logs.tar logs tmp/*txt
gzip -9 logs.tar

Send us logs.tar.gz via https://upload.stor2rrd.com

Pavel · May 2019

Hi,

use this as a fix, it is a know issue, 9.5 have little different API syntax

https://www.stor2rrd.com/download/naperf.pl.gz

-rwxrwxr-x 1 stor2rrd stor2rrd 103416 Mar 27 12:31 bin/naperf.pl
Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, stor2rrd owner)

If your web browser gunzips it automatically then just rename it: mv naperf.pl.gz naperf.pl
Assure that file size is the same as on above example

waith 30 minutes, you shoudl see data then.

zsoltesz · May 2019

Thank you Pavel. It is much better now. I see some errors on the graphs, but I will check it in the begining of the next week.

There is no performance data from one of the two NetApp storage

Comments

Howdy, Stranger!

Categories

In this Discussion