Totals for SAN Switches are not working

Zoltan
Zoltan
in STOR2RRD
Hi,

I just realised today, that the Total for SAN switches are not working (Data is displayed only for 4 switches) . Data and Frame are affected. As I can see, we have this problem since July:


Individual data for all switches are there. What could be the problem? We are using stor2rrd v2.61 currently.

Regards,
Zoltan

Comments

  • Karel
    Karel
    Hi Zoltan,

    Send us logs pls. 
    Note a short problem description in the text field of the upload form.

    cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
    tar cvhf logs.tar logs tmp/*txt
    gzip -9 logs.tar

    Send us logs.tar.gz via https://upload.stor2rrd.com
  • Zoltan
    Zoltan
    Hi Karel,

    I have uploaded the logs.
  • Karel
    Karel
    Hi Zoltan,

    you have got some strange directory called "No more variables left in this MIB View (It is past the end of the MIB tree)" in your data directory. See below. Directory was created on July 17th.

    ======== ls -l /opt/serviced/volumes/stor2rrd/data
    total 1252
    ...
    drwxr-xr-x  2 zenoss zenoss  4096 Jul 17 09:33 No more variables left in this MIB View (It is past the end of the MIB tree)

    Remove these files, it should help:

    rm -r "/opt/serviced/volumes/stor2rrd/data/No more variables left in this MIB View (It is past the end of the MIB tree)"
    rm /opt/serviced/volumes/stor2rrd/tmp/san_last_up*

    Let us know tomorrow if it helped, thanks.

  • Zoltan
    Zoltan
    Hi Karel,

    that caused the problem, Total is working again correctly.

    Thank you!
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion