stor2rrd 2.50 free and hitachi

emilio65 · April 2019

Hi expert

I configured in the storage-list.cfg the hitachi connection in this way

VSPG-200-01:VSPG:10.209.xx.xx:stor2:PASSWORD:/etc/horcm1.conf::::10.209.xx.xx:2c:161::SGS-MGMT-01

I also installed the patch to solve the problem with san_verify.pl

"No such file or directory/home/stor2rrd/stor2rrd/bin/SNMP_lib.pm:474 : No such file or directory"

The config_check.sh work well but I stor2rrd doent' collect data

In the log file

error.log-VSPG-200-01 I found these error

COMMAND ERROR : EUserId for HORC[1] : stor2rrd (4001) Mon Apr 1 13:57:05 2019
CMDLINE : raidcom -logout -I1
13:57:05-6a7ff-00062769- [raidcom][exit(202)]
[EX_ENAUTH] Authentication failed with User
[Cause ]:Authentication for using the RAID has failed with User name or Password.
[Action]:Please confirm if User name or Password are correct, or confirm expiration date.
raidcom: [EX_ENAUTH] Authentication failed with User
Mon Apr 1 13:57:05 2019: command failed: raidcom -logout -I1 /home/stor2rrd/stor2rrd/bin/vspgconf.pl:3286 :

The error seems due to bad user/password

I suspect that the test config_check.sh uses the user and password specified in the storage-list.cfg

while vspgconf.pl use the user/password specified in the stor2rrd.cfg where I got

# User for storage access
# Valid only for SVC/Storwize/FlashSystem, XIV, HUS, DS8000, 3PAR storages
# Rest of storages have users defined per storage in etc/storage-list.cfg
STORAGE_USER=stor2rrd

Am I in right ???

Thanks for the help

Emilio

Lukas · April 2019

Hello,

1. you are not right. Scripts vspgconf.pl and vspgperf.pl uses the user and password specified in the storage-list.cfg.

2. You will check user and password in etc/storage-list.cfg. Use encrypted password.

https://www.stor2rrd.com/Hitachi-VSPG-VSP-HUS-AMS-monitoring.htm

3. You will send us outputs from the commands

cd /home/stor2rrd/stor2rrd

./bin/config_check.sh VSPG-200-01

crontab -l | grep vspg

Thank you

emilio65 · April 2019

here the answer

=========================
STORAGE: VSPG-200-01: VSPG
=========================
TCP connection to "10.209.50.98" on port "1099" is ok
TCP connection to "10.209.50.98" on port "51099" is ok
TCP connection to "10.209.50.98" on port "51100" is ok
WARNING : TCP connection to "10.209.50.98" on port "51101" has failed! It might need to be open on the firewall.

Health status test
UDP connection to "10.209.50.96" on port "161" is ok

san_verify.pl:
snmpwalk -v 2c -c SGS-MGMT-01 10.209.50.96 1.3.6.1.4.1.116.5.11.4.1.1
SNMP version : 2c (default)
Port          : 161 (default)
Timeout       : 5 seconds
Community     : SGS-MGMT-01
Storage name : VSP Gx00

Health status for VSPG-200-01 : ok

Loading ExportTool...
Export tool start [Version 83-05-29-FF/00]
command file = /opt/hds/hds_test/command.txt
[ 1] ip 10.209.50.98        ; Specifies IP adress of SVP
[ 2] dkcsn 480074           ; Specifies Serial Number of SVP
[ 3] login User = [stor2], Passwd = [****************]
[MPC Software Version] 83-05-29-20/00
[ExportTool version] 83-05-29-FF/00
[ExportTool IF version] 83-00-00
Unable to get time range for monitoring
[ 4] show                  ; output storing period
Monitoring time range
From : 2019/03/31 15:57 - To : 2019/04/01 15:57 Interval : 1min.
[ 5] group Port ; Port usage
[ 6] range -0001:
        range [2019/04/01 15:56:00]:[2019/04/01 15:57:00], count = 1
[ 7] outpath "/opt/hds/hds_test/performance" ; specifies the sub-directory in which files will be saved
[ 8] option nocompress
[ 9] apply
Start gathering port data
Target = 8, Total = 8
+----+----+----+----+----+----+----+----+----+----+
...................................................
End gathering port data
Start gathering Initiator port data
Target = 8, Total = 8
+----+----+----+----+----+----+----+----+----+----+
...................................................
End gathering Initiator port data
Export tool end
raidcom : User on Serial#(480074) was removed.
connection ok

crontab -l | grep vspg
0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_vspgperf.sh > /home/stor2rrd/stor2rrd/load_vspgperf.out

Lukas · April 2019

Hello,

It looks good. Do you see data in the GUI? If no send us logs pls.

Note a short problem description in the text field of the upload form.

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir

tar cvhf logs.tar logs tmp/*txt

gzip -9 logs.tar

Send us logs.tar.gz via https://upload.stor2rrd.com

You might even attach screenshots when it helps in understanding of the issue.

Thank you

stor2rrd 2.50 free and hitachi

Comments

Howdy, Stranger!

Categories

In this Discussion