No data is collected from HUS150

Zoltan
Zoltan
in Hitachi
Hello,

I just configured a HUS in stor2rrd, but it does not seem to work. Error log is filled with this:

-path: DMEC002103: The directory does not exist.

Cannot read /opt/serviced/volumes/stor2rrd/data/starshus02/IOSTATS/04/pfm00000.txt: No such file or directory/opt/serviced/volumes/stor2rrd/bin/husperf.pl:112
-path: DMEC002103: The directory does not exist.

Cannot read /opt/serviced/volumes/stor2rrd/data/starshus02/IOSTATS/14/pfm00000.txt: No such file or directory/opt/serviced/volumes/stor2rrd/bin/husperf.pl:112
-path: DMEC002103: The directory does not exist.

Cannot read /opt/serviced/volumes/stor2rrd/data/starshus02/IOSTATS/24/pfm00000.txt: No such file or directory/opt/serviced/volumes/stor2rrd/bin/husperf.pl:112
-path: DMEC002103: The directory does not exist.

Cannot read /opt/serviced/volumes/stor2rrd/data/starshus02/IOSTATS/34/pfm00000.txt: No such file or directory/opt/serviced/volumes/stor2rrd/bin/husperf.pl:112
-path: DMEC002103: The directory does not exist.

What could be the problem? Connection test shows no error.

Regards,
Zoltan

Comments

  • Lukas
    Lukas
    Hello,

    you have two options

    1) you will change crontab line to

    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_husperf.sh > /home/stor2rrd/stor2rrd/load_husperf.out 2>&1

    2) or you try this a fix

    http://download.stor2rrd.com/patch/husperf.pl.gz
    Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, stor2rrd owner)
    -rwxr-xr-x 1 stor2rrd stor2rrd 113427  6. pro 14.39 husperf.pl
    If your web browser gunzips it automatically then just rename it: mv husperf.pl.gz husperf.pl

    after copy script to bin directory (or apply point 1) you wait about 20 minutes then


    cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
    ./load.sh


    refresh GUI

    you should see data


    Let us know

    Thank you

  • Zoltan
    Zoltan
    Hello,

    I have tried option 1), and it is working now. Thank you!
    Just a question reagading option 2). If I use the new file, can I set run times differently as 0,5,10 etc?

    Regards,
    Zoltan
  • Lukas
    Lukas
    Hello,

    yes you can (just be careful that the interval was 5 minutes for example 4,9,14 etc). Try it and let us know.


    Thank you
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion