V9K stopped generating graphs

yaobi
yaobi
in IBM
Hi, I have 3 IBM, 1 V7k that is working fine and 2 v9k that stopped collecting data and shows no graph.

I ran config check and the connection seens to be OK

[lpar2rrd@xorux bin]$ ./config_check.sh
tee: /home/stor2rrd/stor2rrd/logs/config_check.out: Permission denied

ERROR: Perl module has not been found: LWP::Protocol::https
       It is a must for VMAX, VPLEX, Huawei, Compellent, NetApp, PureStorage, Infinibox, Isilon, BNA
       and some others which use HTTPS protocol if is configured in etc/storage-list.cfg
Note that it does not affect storages where is not used HTTPS API for getting data
Refer here how to resolve it: http://www.stor2rrd.com/https.htm

Install all missing Perl modules and do this test again, check http://www.stor2rrd.com/install.htm:
Usage: cd /home/stor2rrd/stor2rrd; . etc/stor2rrd.cfg; $PERL bin/perl_modules_check.pl

=========================
STORAGE: v9000_9A00: SWIZ : sample rate: 300 seconds
=========================
TCP connection to "172.19.117.118" on port "22" is ok
  ssh -o ConnectTimeout=80 -o StrictHostKeyChecking=no -o PreferredAuthentications=publickey -o SendEnv=no lpar2rrd@172.19.117.118  "lscurrentuser"
  connection ok

=========================
STORAGE: v9000_9974: SWIZ : sample rate: 300 seconds
=========================
TCP connection to "172.19.117.123" on port "22" is ok
  ssh -o ConnectTimeout=80 -o StrictHostKeyChecking=no -o PreferredAuthentications=publickey -o SendEnv=no lpar2rrd@172.19.117.123  "lscurrentuser"
  connection ok

=========================
STORAGE: v7000_4B46: SWIZ : sample rate: 300 seconds
=========================
TCP connection to "172.19.117.128" on port "22" is ok
  ssh -o ConnectTimeout=80 -o StrictHostKeyChecking=no -o PreferredAuthentications=publickey -o SendEnv=no lpar2rrd@172.19.117.128  "lscurrentuser"
  connection ok


========
Summary:
========
v9000_9A00  ok
v9000_9974  ok
v7000_4B46  ok


Crontab is fine as well

[lpar2rrd@xorux stor2rrd]$ crontab -l | grep V9000 -A 1
# SVC/Storwize/Flash V9000 storage agent
*/5 * * * * /home/lpar2rrd/stor2rrd/load_svcperf.sh > /home/lpar2rrd/stor2rrd/load_svcperf.out 2>&1


lpar2rrd@xorux stor2rrd]$ cat /home/lpar2rrd/stor2rrd/load_svcperf.out
Waiting for 4309
Waiting for 4342
Waiting for 4375



If someone can help, I'm grateful.

Comments

Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion