DS3400 and DS3000
Stor2rrd work find with my DS3500
But with my DS3000 ans 3400 it dont work
Thu Apr 12 11:05:19 2018: SMcli command failed: "/opt/IBM_DS/client/SMcli -n XXX -e -c "set session performanceMonitorInterval=300 performanceMonitorIterations=1 ; show llLogicalDrives performanceStats;" 2>/dev/null" : /home/lpar2rrd/stor2rrd/bin/ds5perf.pl:1124 :
Thu Apr 12 11:05:19 2018: g script...Could not communicate with the controllers of Storage Subsystem XXX to complete this request.Possible cause
s include network or connection problems, controller problems or no power to the host or storage subsystem. Check these possible causes and then retry the
operation. If you suspect a controller problem, use the Recovery Guru to resolve the problem.The command at line 1 that caused the error is:show allLogic
alDrives performanceStats;Script execution halted due to error.SMcli failed. : /home/lpar2rrd/stor2rrd/bin/ds5perf.pl:1125 :
When i test my config :
[lpar2rrd@xorux stor2rrd]$ ./bin/config_check.sh
=========================
STORAGE: XXX: DS5K
=========================
/opt/IBM_DS/client/SMcli -n XXX -e -c "show hostTopology;"
connection ok
In my config ( storage-list.cfg ) file i have :
XXX:DS5K:
Best regard.
Toufic.
But with my DS3000 ans 3400 it dont work
Thu Apr 12 11:05:19 2018: SMcli command failed: "/opt/IBM_DS/client/SMcli -n XXX -e -c "set session performanceMonitorInterval=300 performanceMonitorIterations=1 ; show llLogicalDrives performanceStats;" 2>/dev/null" : /home/lpar2rrd/stor2rrd/bin/ds5perf.pl:1124 :
Thu Apr 12 11:05:19 2018: g script...Could not communicate with the controllers of Storage Subsystem XXX to complete this request.Possible cause
s include network or connection problems, controller problems or no power to the host or storage subsystem. Check these possible causes and then retry the
operation. If you suspect a controller problem, use the Recovery Guru to resolve the problem.The command at line 1 that caused the error is:show allLogic
alDrives performanceStats;Script execution halted due to error.SMcli failed. : /home/lpar2rrd/stor2rrd/bin/ds5perf.pl:1125 :
When i test my config :
[lpar2rrd@xorux stor2rrd]$ ./bin/config_check.sh
=========================
STORAGE: XXX: DS5K
=========================
/opt/IBM_DS/client/SMcli -n XXX -e -c "show hostTopology;"
connection ok
In my config ( storage-list.cfg ) file i have :
XXX:DS5K:
Best regard.
Toufic.
Comments
-
Hi,
what retuns this? Do you see all storages?
SMcli -d
-
Hi.
[lpar2rrd@xorux tmp]$ /opt/IBM_DS/client/SMcli -d
XXX x.x.x.x
Yes i see all storages.
-
would say that the problem is that you have configured just 1 controler (1 IP), see below example:
$ SMcli -A 1.1.1.2 1.1.1.3
New storage subsystem was discovered at address 1.1.1.2
New storage subsystem was discovered at address 1.1.1.3
SMcli completed successfully
$ SMcli -d
DS3500_name ControlerA_hostname ControlerB_hostname
Try this (place there even IP of the second controller) for each storage (-X removes it)
$ SMcli -X 181853A-78K1Y1V-ds5300s1
` $ SMcli -A 181853A-78K1Y1V-ds5300s1 <IP of the first controller> <IP of the second controller>
$ SMcli -d
-
Thanks you.
It work with this modification.
Best regards.
Toufic;
Howdy, Stranger!
Categories
- 1.6K All Categories
- 41 XORMON NG
- 25 XORMON
- 149 LPAR2RRD
- 13 VMware
- 16 IBM i
- 2 oVirt / RHV
- 4 MS Windows and Hyper-V
- Solaris / OracleVM
- XenServer / Citrix
- Nutanix
- 6 Database
- 2 Cloud
- 10 Kubernetes / OpenShift / Docker
- 122 STOR2RRD
- 19 SAN
- 7 LAN
- 17 IBM
- 3 EMC
- 12 Hitachi
- 5 NetApp
- 15 HPE
- Lenovo
- 1 Huawei
- 1 Dell
- Fujitsu
- 2 DataCore
- INFINIDAT
- 3 Pure Storage
- Oracle