Update Lpar2rrd 7.2 server

mcaroca
mcaroca
in LPAR2RRD
Hello team:
When trying to upgrade Lpar2rrd server from version 7.1 to 7.2 on a linux 6.1 server. I present the following error:


[lpar2rrd@ibmmon lpar2rrd-7.20]$ sh ./update.sh
Where is LPAR2RRD actually located [/home/lpar2rrd/lpar2rrd]:
Extracting distribution
Backing up original version : 7.10 to /home/lpar2rrd/lpar2rrd/BACKUP-INSTALL/lpar2rrd-7.10
Saving 7.10 configuration
Copy new version to the target destination
Configuring new /home/lpar2rrd/lpar2rrd/etc/lpar2rrd.cfg
Setting file/dir permissions, it might take some time in big environments
chmod -R o+r,o+x /home/lpar2rrd/lpar2rrd/data


Stopping LPAR2RRD daemon

ERROR: Perl module has not been found: IO::Socket::IP
       Check its existenci via: /usr/bin/perl -e 'use IO::Socket::IP'
ERROR: Perl module has not been found: IO::Socket::IP
       Check its existenci via: /usr/bin/perl -e 'use IO::Socket::IP'
Warning: LWP::Protocol::https should be version 6.x (act version: 5.833)
VMware and IBM Power REST API support might require that
Upgrade to 6.x: http://www.lpar2rrd.com/https.htm

Install all missing Perl modules and do this test again, check http://www.lpar2rrd.com/https.htm:
Usage: cd <LPAR2RRD WORK DIR>; . etc/lpar2rrd.cfg; $PERL bin/perl_modules_check.pl


./bin/alert_history_log_fmt.sh
INFO: /home/lpar2rrd/lpar2rrd/logs/alert_history.log copied to /home/lpar2rrd/lpar2rrd/logs/alert_history.log.bkp
INFO: Reformatted /home/lpar2rrd/lpar2rrd/logs/alert_history.log


[lpar2rrd@ibmmon lpar2rrd-7.20]$
[lpar2rrd@ibmmon ~]$ cd /home/lpar2rrd/lpar2rrd
[lpar2rrd@ibmmon lpar2rrd]$ . etc/lpar2rrd.cfg
[lpar2rrd@ibmmon lpar2rrd]$ $PERL bin/perl_modules_check.pl

ERROR: Perl module has not been found: IO::Socket::IP
       Check its existenci via: /usr/bin/perl -e 'use IO::Socket::IP'
ERROR: Perl module has not been found: IO::Socket::IP
       Check its existenci via: /usr/bin/perl -e 'use IO::Socket::IP'
Warning: LWP::Protocol::https should be version 6.x (act version: 5.833)
VMware and IBM Power REST API support might require that
Upgrade to 6.x: http://www.lpar2rrd.com/https.htm

Install all missing Perl modules and do this test again, check http://www.lpar2rrd.com/https.htm:
Usage: cd <LPAR2RRD WORK DIR>; . etc/lpar2rrd.cfg; $PERL bin/perl_modules_check.pl

[lpar2rrd@ibmmon lpar2rrd]$
lpar2rrd@ibmmon lpar2rrd]$ rpm -qa|grep perl
perl-Time-HiRes-1.9721-144.el6.x86_64
perl-XML-NamespaceSupport-1.10-3.el6.noarch
perl-XML-SAX-0.96-7.el6.noarch
perl-TimeDate-1.16-13.el6.noarch
perl-libs-5.10.1-144.el6.x86_64
perl-5.10.1-144.el6.x86_64
perl-Compress-Zlib-2.021-144.el6.x86_64
perl-IO-Tty-1.08-4.el6.x86_64
perl-PDF-API2-2.021-1.el6.noarch
perl-XML-LibXML-1.70-5.el6.x86_64
perl-HTML-Parser-3.64-2.el6.x86_64
perl-XML-Parser-2.36-7.el6.x86_64
perl-Pod-Escapes-1.04-144.el6.x86_64
perl-Pod-Simple-3.13-144.el6.x86_64
perl-version-0.77-144.el6.x86_64
perl-Compress-Raw-Zlib-2.021-144.el6.x86_64
perl-IO-Compress-Zlib-2.021-144.el6.x86_64
perl-libwww-perl-5.833-5.el6.noarch
perl-Font-TTF-0.45-6.el6.noarch
perl-URI-1.40-2.el6.noarch
perl-HTML-Tagset-3.20-4.el6.noarch
perl-XML-Simple-2.18-6.el6.noarch
rrdtool-perl-1.3.8-10.el6.x86_64
perl-Module-Pluggable-3.90-144.el6.x86_64
perl-IO-Compress-Base-2.021-144.el6.x86_64
perl-CGI-3.51-144.el6.x86_64
perl-Crypt-SSLeay-0.57-17.el6.x86_64
[lpar2rrd@ibmmon lpar2rrd]$


Comments

  • Pavel
    Pavel
    Hi,

    ok, you are on CentOS 6.x, you can ignore it, it is only warning
  • Pavel
    Pavel
    well, just to make sure, is the product working after the upgrade?

  • Pavel
    Pavel
    this output yet:
    rpm --eval '%{rhel}'

  • mcaroca
    mcaroca
    Hello:
      The service was not working after the update attempt. These types of errors appear in logs:

    BEGIN failed - compilation aborted at /home/lpar2rrd/lpar2rrd/bin/lpar2rrd-daemon.pl line 25.
    Compilation failed in require at /home/lpar2rrd/lpar2rrd/bin/lpar2rrd-daemon.pl line 25.
    BEGIN failed - compilation aborted at /home/lpar2rrd/lpar2rrd/lib/IO/Socket/IP.pm line 33.
    Socket version 1.97 required - this is only version 1.82 at /home/lpar2rrd/lpar2rrd/lib/IO/Socket/IP.pm line 33.

    [root @ ibmmon ~] # rpm --eval '% {rhel}'
    6
    [root @ ibmmon ~] # cat / etc / oracle-release
    Oracle Linux Server release 6.10
    [root @ ibmmon ~] #
  • Pavel
    Pavel
    Hi,

    ok, I see it, it was fixed recently, upgrade to https://www.lpar2rrd.com/download-static/lpar2rrd-7.21.tar


  • mcaroca
    mcaroca
    Hello:
      With this new installer it was possible to activate the lpar2rrd monitoring service. Thank you so much.


    [lpar2rrd@ibmmon lpar2rrd-7.21]$ sh ./update.sh
    Where is LPAR2RRD actually located [/home/lpar2rrd/lpar2rrd]:
    Extracting distribution
    Backing up original version : 7.20 to /home/lpar2rrd/lpar2rrd/BACKUP-INSTALL/lpar2rrd-7.20
    Saving 7.20 configuration
    Copy new version to the target destination
    Configuring new /home/lpar2rrd/lpar2rrd/etc/lpar2rrd.cfg
    Setting file/dir permissions, it might take some time in big environments
    chmod -R o+r,o+x /home/lpar2rrd/lpar2rrd/data


    Stopping LPAR2RRD daemon
    Warning: LWP::Protocol::https should be version 6.x (act version: 5.833)
    VMware and IBM Power REST API support might require that
    Upgrade to 6.x: http://www.lpar2rrd.com/https.htm


    Upgrade to version 7.21 is done
    Now you can start the tool:

     cd /home/lpar2rrd/lpar2rrd
     ./load.sh 2>&1 | tee logs/load.out-initial

    Wait for finishing of that, then refresh the GUI (Ctrl-F5)

    [lpar2rrd@ibmmon lpar2rrd-7.21]$  cd /home/lpar2rrd/lpar2rrd
    [lpar2rrd@ibmmon lpar2rrd]$  ./load.sh 2>&1 | tee logs/load.out-initial
    Thu Jul  8 15:00:09 -04 2021: There is already running another copy of load.sh, exiting ...
    Thu Jul  8 15:00:09 -04 2021: There is already running another copy of load_vmware.sh, exiting ...
    [lpar2rrd@ibmmon lpar2rrd]$



Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion