NPIV SAN Errors on VIOS
Hello
in your doc i saw that we can see FC errors only on physical adapters and:
"Note AIX NPIV FC adapters do not provide error statistics, therefore nothing is presented for them."
Is it the case also to VIOS ? There is fcstat for NPIV adapters and errors are provided.
thanks for clarification.
Marcin
Comments
-
we never seen any error on NPIV adapters.
can you show en example?
all error counters are always "-1" on NPIV FC adapters (client side)
fcstat fcs0
-
ah, sorry my bad...it is not npiv..i misunderstood
but, we have some errors on fcs5 everyday:
LIP Count: 0
NOS Count: 0
Error Frames: 111
Dumped Frames: 0
Link Failure Count: 0
Loss of Sync Count: 1
Loss of Signal: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 127
Invalid CRC Count: 111
and nothing is shown on SAN ERROR graph for VIOS.
-
we present it as FC errors/sec.
If there is 1 error per a minute then it is 1 / 60.
You can see in the graph 2 small peaks for fcs5 about 20:30 and 22:20
Howdy, Stranger!
Categories
- 1.5K All Categories
- 7 XORMON NG
- 24 XORMON
- 123 LPAR2RRD
- 9 VMware
- 12 IBM i
- 1 oVirt / RHV
- 4 MS Windows and Hyper-V
- Solaris / OracleVM
- XenServer / Citrix
- Nutanix
- 6 Database
- 1 Cloud
- 9 Kubernetes / OpenShift / Docker
- 102 STOR2RRD
- 14 SAN
- 6 LAN
- 15 IBM
- 3 EMC
- 10 Hitachi
- 5 NetApp
- 13 HPE
- Lenovo
- 1 Huawei
- 1 Dell
- Fujitsu
- 2 DataCore
- INFINIDAT
- 3 Pure Storage
- Oracle