Brocade 6547

randitskiy
randitskiy
in SAN
Help solve the problem. There is a BLADE Lenovo Flex chassis, in which Brocade 6547 SAN switches are installed. When polled via SNMP "World Wide Name Model", the value is always 500. The switch always has this value in AG and Switch mode. Because of this, all switches fall into one fabric.
Maybe someone has encountered such a situation?

Comments

  • Karel
    Karel
    Hi,

    we use these 2 OIDs to determine to which fabric the switch belongs.
    Can you share outputs from your switch?

    snmpwalk -v 1 -c <community string> <switch IP> 1.3.6.1.2.1.75.1.1.1
    snmpwalk -v 1 -c <community string> <switch IP> 1.3.6.1.2.1.75.1.1.2

    fcFeFabricName 1.3.6.1.2.1.75.1.1.1
    The Name_Identifier of the fabric to which this fabric element belongs.
    This object returns the WWN of the primary switch in the fabric.

    fcFeElementName 1.3.6.1.2.1.75.1.1.2
    The Name_Identifier of the fabric element.
    This object returns the WWN of the switch.

    You can share it here or via email (support@stor2rrd.com).

    NOTE: If the switch is in the AG mode (access gateway), then we are not able to assign this switch to the fabric. Switches in the AG mode are automatically assigned to fabric called Access gateway.
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Categories

In this Discussion