SAN Cisco NX-OS(tm) m9700 switches display port speed wrong way stor2rrd (2.71 )

SAN Cisco NX-OS(tm) m9700 switches display wrong port speed
stor2rrd (2.71 )  2.70 was OK

Software (m9700-sf3ek9-mz), Version 8.4(1a) 
stor2rrd ->
fc1-15 END HOST - 21:00:34:80:0D:3C:80:68 PROD (10) 2000 Gbps - - up

switch side 
-mds1a# show int fc1/15
fc1/15 is up
    Port description is END HOST
    Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
    Port WWN is 20:0f:00:3a:9c:40:a0:00
    Admin port mode is F, trunk mode is off
    snmp link state traps are enabled
    Port mode is F, FCID is 0x0b0020
    Port vsan is 10
    Admin Speed is auto max 32 Gbps
    Operating Speed is 16 Gbps

logs uploaded



  • Hi @tomlee,

    you're right, there is a bug in 2.71 version. Use the following file as a fix.

    Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, stor2rrd owner)
    -rwxr-xr-x 1 stor2rrd stor2rrd 123243 Apr  6 13:23
    If your web browser gunzips it automatically then just rename it: mv

    After deploying:

    cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
    rm tmp/*-conf-run

    Configuration table should be refreshed till 10 minutes. Let us know, thanks.

  • Great Thanks
    issue resolved.

Sign In or Register to comment.