skol

Hello all During collection of the data for Pavel I found it myself. If someone else runs into this problem - here the issue and solution We are running RHEL 7.9 and timedatectl showed the follwing: Time zone: n/a (CEST, +0200) Setting it with "timedatectl set-timezone Europe/Zurich" showed always a permission error the…

Hello Pavel Yes - everything is in our local timezone - server and all clients.

Logs uploaded

unfortunately does "vmstat" not show any "pc" values if the the lpar is in dedicated donating mode.

lpar2rrd and the calues in the HMC native graphs seem to match. I am wondering why nmon on the VIOs report much more. The same day we changed to dedicated donating we also updated the VIO to the latest release. I will do more tests on a test VIO. Maybe I can find out if it is general showning to much or only in dedicated…

Hi Pavel Had to fight with the PERL5LIB but eventually it worked. Thanks Stefan

Hi Matej logs are uploaded.

now I see the second number is even smaller than the first in "Output Bytes". I have problems attaching a printscreen. But there it shows about 2.5 MB/s average.

Hi Pavel I made with ndisk64 IO on the disk. Here the output of your commands: /root # date; fcstat fcs0 | grep Bytes; sleep 300; fcstat fcs0 | grep BytesFri Aug 6 16:21:19 CEST 2021 Input Bytes: 35051667 Output Bytes: 1503871560 Input Bytes: 47163539 Output Bytes: 318964296 This are about 3 MB/s on fcs0. It matches the…

After Update the CPU Values are shown but unfortunately only since update. Is there a way to get also the history data back? 

After running the first time /home/lpar2rrd/lpar2rrd/load_hmc_rest_api.sh the json error is gone - but no CPU data for the system is available anymore in the GUI. The data for the LPARs are available.

Hi, Data uploaded.

Hi Pavel Yes - they are in there: root@xxxxxxx [/root]# iostat -Dsal System configuration: lcpu=32 drives=7 paths=14 vdisks=2 tapes=0 System: xxxxxxx Kbps tps Kb_read Kb_wrtn Physical 8305.5 109.9 76221193869 15584319485 Vadapter: xfers read write queue-------------------- ---------------------------------------…

Hello We have the same issue. Most LPARs are showing only one vscsi adapter even we have traffic over both. We just updated to 6.15 but still the same. Regards Stefan

Hi The original file has the same size and no difference with "diff" command Therefore it didn't change the situation. -rwxr-xr-x. 1 lpar2rrd lpar2rrd 274633 Mar 5 18:43 vmw2rrd.pl ->New -rwxr-xr-x. 1 lpar2rrd lpar2rrd 274633 Mar 5 13:07 vmw2rrd.pl.20190305 -> Original Now I used the one before the update from 6.00 to…

Thanks a lot - now the report is correct. But after upgrading to 6.00-7 I have the following problem I have 5 clusters with 4 ESX hosts each but now all ESX-Hosts are in the "Default"-Cluster. When I have a look into the file: .../lpar2rrd/lpar2rrd/data/[Hostname]/[Vcenter Name]/my_cluster_name after each load.sh the name…

Hi Pavel Thanks for the fast respond. I assumed the 5.10 is only for the user specific reports not the general reporting feature. Thank you for clarification and looking forward to this version. Stefan

Hi Pavel Great - it works - thanks a lot for your support. Regards Stefan