Comments
-
Thanks Pavel! Issue was solved when upgrade to v2.70 Thanks
-
Last question Pavel, If I install from scratch lpar2rrd/stor2rrd in RHEL, is possible to migrate data already stored in AIX to Linux? I'd not like to lost data from lpar2rrd/stor2rrd.
-
Thx pavel, openssl was updated as part of a new version of httpd server (also upgraded). I'll try to upgrade snmp pkgs. Agree, I know AIX package manager is very bad. Maybe it's time to migrate lpar2rrd/stor2rrd to RHEL on intel. cheers
-
Hi Pavel, it will not work only for AIx systems? Or the issue is the same for Linux? Any work future work arround for this issue? In our case we can not downgrade openssl (AUDIT requierements)
-
OK!... I'll open a new case for another issue we have with stor2rrd inn the other customer.Thanks much!
-
Worked Perfectly.As always, one of the best support ever. :smile: Thanks
-
[stor2rrd@lpar2rrd:/home/stor2rrd/stor2rrd] time /opt/freeware/bin/snmpwalk -v 1 -c public123 "192.168.x.x" 1.3.6.1.2.1.1.5 SNMPv2-MIB::sysName.0 = STRING: SW_BLADE_1 real 0m0.26s user 0m0.04s sys 0m0.01s
-
Logs uplodaded. Thx pavel!
-
Can I roll-backstor2rrd to version 2.41?
-
Hi, No, config_check to this switch give the same error of my first post.No, there's no data in GUI after upgrade to 2.50
-
[stor2rrd@lpar2rrd:/home/stor2rrd/stor2rrd/logs] ls -l /home/stor2rrd/stor2rrd/bin/san_verify.pl -rwxr-xr-x 1 stor2rrd staff 4584 Feb 19 16:50 /home/stor2rrd/stor2rrd/bin/san_verify.pl
-
Also, see upgrade log: [stor2rrd@lpar2rrd:/home/stor2rrd/stor2rrd/logs] cat stor2rrd-install.log-21561826 Product upgrade under user : "stor2rrd" Where is the product actually located [/home/stor2rrd/stor2rrd]: Backing up original version : 2.41 to /home/stor2rrd/stor2rrd/BACKUP-INSTALL/stor2rrd-2.41 Saving actual…
-
Hi, I have upgraded to 2.50 last week. See below:[stor2rrd@lpar2rrd:/home/stor2rrd/stor2rrd/etc] more stor2rrd.cfg # # STOR2RRD main configuration file # STOR2RRD home : http://www.stor2rrd.com version=2.50 # Update following parametrs ############################ # User for storage access # Valid only for…
-
Hi, find below output of snmpwalk First, command failed: [stor2rrd@lpar2rrd:/home/stor2rrd/stor2rrd/bin] snmpwalk -v 1 -c public123 192.168.126.5 1.3.6.1.2.1.1.5 ksh: snmpwalk: not found. But with full path it worked: [stor2rrd@lpar2rrd:/home/stor2rrd/stor2rrd/bin] /opt/freeware/bin/snmpwalk -v 1 -c public123 192.168.x.x…
-
Hi, Just installed new san_verify.pl hotfix but issue is still alive. I have run config script test: See config output: ========================= SWITCH: 192.168.1x.x ========================= UDP connection to "192.168.1x.x" on port "161" is ok san_verify.pl: Tue Feb 19 17:54:34 2019: Got Timeout querying 192.168.1x.x:161…
Howdy, Stranger!