Ronald

Hi Pavel, That's the solution. Thanks, Ronald

I've the same problem when using the port 161

Hi , configured a san switch in the config file: 172.24.97.197::BRCD:SAN_A # # Define your SNMP port If you using another then default 161 SNMP_PORT=162 Also configured on the switch snmp with port numbner 162 and trap level Informatical When testing the configuration I've the following error: =========================…

Hi , Ive still problems with an AIX system to monitor the switches. What can be the different between the Linux and the AIX system? Ronald

Hi, On a linux system the command works: snmpwalk -v 1 -c public 172.24.97.197 1.3.6.1.2.1.1.5 SNMPv2-MIB::sysName.0 = STRING: l2-fs10-e0m Ronald

Hi, here the output. l2-fs10-e0m:Brocade> snmpconfig --show snmpv1 SNMPv1 community and trap recipient configuration: Community 1: Secret C0de (rw) No trap recipient configured yet Community 2: public (rw) No trap recipient configured yet Community 3: public (rw) No trap recipient configured yet Community 4: public (ro) No…

Hi, The command you send me does not exist on AIX. Ronald

That's the location thanks, /opt/freeware/bin/snmpwalk -v 1 -c public 172.24.97.197 1.3.6.1.2.1.1.5 No return to the prompt. /opt/freeware/bin/snmpwalk -v 1 -c public 172.24.97.197:162 1.3.6.1.2.1.1.5 Timeout: No Response from 172.24.97.197:162 The config on the switch: Community 4: public (ro) Trap recipient: 172.24.97.81…

Hi, I can't find the command snmpwalk. I'm running on AIX 7.1 and have installed some rpm's net-snmp-5.7.2-1.aix5.1.ppc.rpm net-snmp-devel-5.7.2-1.aix5.1.ppc.rpm net-snmp-perl-5.7.2-1.aix5.1.ppc.rpm net-snmp-utils-5.7.2-1.aix5.1.ppc.rpm