Pavel

well, I will add it to our TODO, but no priority

do you use any hot-fix or regular distribution?

Hi, I affraid we cannot do too much here, switches are not able to response to snmp queries within given time period.We are planing to do some optimalisation in the code at start of new year, it might help a bit.It is unfortunatelly all we can do for now :(

Hi, no any plan, basically no general demand, you are the first one ...

Do you use command device? I see /dev/sd Followhttp://www.stor2rrd.com/HDS-VSPG-command-device-cfg.htmlProbably user rigths for command device is wrong ls -l /dev/sd*

Hi, port alerting is not implemented.Just volumes, pools and complete storage (all pools).

Hi, send us logs: Note a short problem description in the text field of the upload form.

cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir
tar cvhf logs.tar logs etc tmp/*txt
gzip -9 logs.tar

Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, do you have a space in alias name or in volume name?

http://www.lpar2rrd.com/download-static/vcenter-list-cgi.pl.gz Gunzip it and copy to /home/lpar2rrd/lpar2rrd/bin (755, lpar2rrd owner) If your web browser gunzips it automatically then just rename it: mv vcenter-list-cgi.pl.gz vcenter-list-cgi.pl Assure that file size is same as above listed one -rwxrwxr-x 1 lpar2rrd…

ok, I see it, we are able to simulate it. We will send you a fix soon. Anyway free version has a limitation to 1 VM in single pdf http://www.lpar2rrd.com/support.htm?3.0

it does not matter, it should work for both, but better to place it on the top of 2.40-4

Hi, uset this patch: http://www.stor2rrd.com/download-static/Xorux_lib.pm.gz Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, stor2rrd owner) -rwxrwxr-x 1 stor2rrd stor2rrd 17117 Nov 28 12:55 bin/Xorux_lib.pm If your web browser gunzips it automatically then just rename it: mv Xorux_lib.pm.gz Xorux_lib.pmAssure that…

Hi, does that fail even if you choose other 9 VMs?What happen if you select less VMs than 9?

Hi, it is not officially provided or supported by us.

Hi Zach, I do not think it helps you, latest 2.40-3 you use already contains the latest copyservices fix.Anyway try it and let us know, we are working on a workaround for excluding copyservoces alerting as per other thread.

Hi, load this patch and let us know, there was a fix for this copy services issue. Download link: http://download.stor2rrd.com/patch/stor2rrd-2.40-04.tar su - stor2rrd tar xvf stor2rrd-2.40-04.tar cd stor2rrd-2.40-04 ./install.sh cd /home/stor2rrd/stor2rrd ./load.sh refresh the GUI when it finishes (Ctrl-F5)

Hi, what is your stor2rrd version?

Hi, we have finally implemented it based on other forum thread:https://forum.xorux.com/discussion/546/improved-cpu-utilization-graphing-for-hitachi-arrays/p1 You can try it in this build, just upgrade to that: http://www.stor2rrd.com/download-static/stor2rrd-2.41-23.tar

Hi, is that still the same issue with global mirror?We do not have evidency of such issues since the last fixes month ago (a fix above in nthe thread).

Hi, sure, add next interface in vCenter for that VM and it will appear in the appliance then.I am not if automatically, at leats after the reboot

have your tried to put IP into root list?

what about other pools than DefaultPool.Can you try "CPU pool" instead?

is that exported properly on the storage? proper IP? Like in this manual example: 7mode> exportfs /vol/vol0 -sec=sys,rw,root=192.168.1.53,nosuid

Our virtual appliance is based on CentOS 7, just noting it.

Older Isilons might not require it.Recent VMAX and XtremIO most probably need Perl LWP 6.xIt is about support of TLS 1.2 in communication with the storage. New storages do not allow older protocols. What about to install 6.x perl-libwww-perl from some newer RHEL repository (RHEL7) What about CPAN?cpan -f upgrade…

Hi, what storage types going to attach/monitor?Are you trying to install it as a prerequisite or you have a problem connecting some storage?

Hi, there was a bug in the latest version 5.07 for CPU pool alerting, but I am not sure if it is something what affecting even you. Message "ERROR: the first entry to fetch should be after 1980 (-600)" we see for the first time.However start with it anyway and let us known. Use this as a fix.…

Hi, then we have no solution for you, ask SuSE to provide that package ...

Check this to really assure it is not there: find / -name RRDp\*

what about older rrdtool package on SLE? Would be there rrdtool-perl one? if not then take the package from whenever else and install it.