Pavel

Hi, ls -l /home/lpar2rrd/lpar2rrd/tmp/load_alert.sh.pidWhat is yoru LWP version?https://www.lpar2rrd.com/https.htm

Hi, use VMware SDK 6.7. pls download latest 6.7 SDK from here: https://my.vmware.com/web/vmware/details?productId=742&downloadGroup=VS-PERL-SDK67 Place it into /tmp Then under lpar2rrd user cd /home/lpar2rrd/lpar2rrd rm -r vmware-lib/ ./bin/vmware_install.sh /tmp perl /home/lpar2rrd/lpar2rrd/vmware-lib/apps/connect.pl…

Hi, send us this output:ls -l data/<storage name>/POOLcat data/<storage name>/pool.cfg support@stor2rrd. com

Hi, the account is locked or disabled as per error message.What do you want for us? We are not able to resolve such problem, ask Hitachi how to fix that.

Hi, storage does not provide memory usage via the API we use.

change nagios tresholds :)they is not killed by the OS, they disapper after their parents exit. defunct cannot be killed, it is not a proces in fact.

they will disapper, it is not a problem.it is just a record in the process table it does not spend any resources.

Hi, this output: date ps -ef| grep defunct

Hi, can you upgrade to the 2.52 rekleased this week and confirt where it is ok or not.Thee should be that patch involved

Hi, I am not sure if we test UPS status.send uscd /home/stor2rrd/stor2rrd tar cvf d.tar tmp/<storage anme>*txt logs/*<storage name>gzip -9 ... https://upload.stor2rrd.com

hmm, it is bad :( I am affraid there is no solution to make both working, at least I go not idea.just simulate it in our labs and it is same. It required openssl lib and system openssl (lslpp -L | grep openssl) is perhaps too new

Hi, yes, they might be even "ok", there is some internal treshold which selects "interested" LPARs only

Hi, it is ok, it does not present all lpars, just "suspicious/interesting" from perf point of view.If lpar/server is not there that it means that all its resources seem to be fine.

read this: https://www.lpar2rrd.com/max_vrs_average.html?14.15basically standard graphs is not able to fit all data points (1 minutes) therefore it must be averaged.Zooming shows you real maximum.

it should not be, pls logs once morecd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir&#13;tar cvhf logs1.tar logs/*sw2 tmp/sw2*txt&#13;gzip -9 logs1.tar&#13;&#13;Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, yes, that was only example.

Hi, logs pls. Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, we use this FCS stats on Linux, there is no IOPS provided:/sys/class/fc_host/$fcs_path/$fcs/statistics/tx_frames There is no direct convertion possible between frames/sec and IOPS.

sure, however 2.50 comes with optimization in the SAN backend which solves similar problem (it might happened even with a good connectivity).ok, your problem was on the infra level :)

Hi, yes, we have seen that already.are you on AIX right?1. Follow this, assure you have all prerequisites: http://www.lpar2rrd.com/https.htm 2. remove openssl which came as rrdtool prerequisity (version could be different)rpm -qa| grep openssl rpm -e openssl-1.0.2n-1.ppc --nodeps There will still persist system openss…

Hi, what you have placed into httpd.conf (stor2rrd suff)?

Hi, this will resolve it: cd /home/lpar2rrd/lpar2rrd vi etc/lpar2rrd.cfg and replace you actual PERL5LIB by this: &#13; &#13;PERL5LIB=/home/lpar2rrd/lpar2rrd/bin:/home/lpar2rrd/lpar2rrd/vmware-lib:/usr/share/perl5/vendor_perl:/usr/lib64/perl5/vendor_perl:/usr/share/perl5:/home/lpar2rrd/lpar2rrd/lib Go to the GUI and…

sorry, wrong thread, ignore above :)

Hi, this will resolve it: cd /home/lpar2rrd/lpar2rrd vi etc/lpar2rrd.cfg and replace you actual PERL5LIB by this: PERL5LIB=/home/lpar2rrd/lpar2rrd/bin:/home/lpar2rrd/lpar2rrd/vmware-lib:/usr/share/perl5/vendor_perl:/usr/lib64/perl5/vendor_perl:/usr/share/perl5:/home/lpar2rrd/lpar2rrd/lib Go to the GUI and confirm that…

Hi, there is an enhancement 2.50 which should resolve that.

Hi, Send us logs pls. Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com

Hi, do you have the latest version 2.50? if you are on that version already then logs pls.Note a short problem description in the text field of the upload form.&#13;&#13;cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir&#13;tar cvhf logs.tar logs etc tmp/*txt&#13;gzip -9 logs.tar&#13;&#13;Send us…

Hi, this data yet pls (3 files): cd /home/stor2rrd/stor2rrd tar cvf log3.tar tmp/<NAME_OF_FLASHARRAY900>*txtgunzip -9 ... https://upload.stor2rrd.com

Hi, check if you have in place all prerequisites noted here: http://www.lpar2rrd.com/https.htm

Hi, yes, send us this:data/<NAME_OF_FLASHARRAY900>/svc.config.cron.xml_6865976-2 and outpu from: ssh stor2rrd@<flash> "lsportfc -delim ," https://upload.stor2rrd.com