Pavel

ok, this is the right format:NetAppEcloud:NETAPP:CMODE:10.2.0.150:22:443:0:stor2rrd:KDI1MFU5VUUnMDRMYAo=

Are you really sure you do not use TPC (IBM Spectrum Control / Tivoli Storage Productivity Center) for monitoring of that storage?Or any other monitoring?

Hi, it is wrong cmode-alias::NetAppEcloud:CMODE:10.2.0.150:22:443:0:stor2rrd:KDI1MFU5VUUnMDRMYAo= /home/lpar2rrd/stor2rrd/bin/top.pl:82 use this line instead: NetAppEcloud:CMODE:10.2.0.150:22:443:0:stor2rrd:KDI1MFU5VUUnMDRMYAo=

Hi, 1. grep SAMPLE_RATE= etc/stor2rrd.cfg SAMPLE_RATE=300 2. remove IP from output grep storwizeVFARM etc/storage-list.cfg

Hi, Send us logs pls. Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, looks like there is running TPC monitoring which uses 1 minute sample reate (its deault)stor2rrd uses 5 minutes and same data collection. Both tools must use same sample rate to make it work. Check that page: https://www.stor2rrd.com/TPC.htm

no, it does not work

Hi, logs plsNote a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, generally it is not possible to insert any old data into rrdtool file, it accepts only new data.Also export/import way with puting new data is not easy or feed it from csv.

Hi, - Hitachi USP, we hear about such storage for the first time, no one has even mentioned, not supported, we have just put it onto our voting list: https://www.stor2rrd.com/voting.php - HPE XP is supported, https://www.stor2rrd.com/HPE-3PAR-MSA-XP7-NIMBLE-StoreOnce-monitoring.htm --> XP7

Hi Alex, we have no simple solution for that either.Solution would be avoiding ssh access, it could be potentially possible as we recently discovered.However it is not easy, it would require re-desing data gathering (using different API what bring some other problems ..) So no solution here for now from us :(

Hi, sorry for delay.1. use rather Perl SDK 6.5, not 6.7 one if you have older vCenter before its installation clean actual vmware-lib directorycd /home/lpar2rrd/lpar2rrdrm -r vmware-lib/*install 6.5 SDK as per docu 2. use PERL5LIB mentioned in this codu: https://www.lpar2rrd.com/https.htmchange path if necessary…

Hi, it says conmnection succesfull, it looks good, do you see anything in the GUI after Ctrl-F5

https://www.lpar2rrd.com/https.htm

Hi, it all looks good, basically here is our troubleshooting manual. what reports this:. etc./lpar2rrd.cfg$PERL -MLWP -e 'print "$LWP::VERSION\n"'; echo "$PERL $PERL5LIB"

you can remove data/<storage name> directory, then everything wil be rediscovered

Hi, pls screenshots1. host which is working, 2. some other host3. volume aggregated graph4. ls -l data/<storage>HOST 5. cat data/<storage>/HOST/host*txt https://upload.stor2rrd.com

Hi, use VNX block when it is VNX block + file, it will work with the latest version 2.50+

Hi, try to remove these filestor2rrd/data/XIVNAMEHERE/tmp/cache.file &#13;stor2rrd/data/XIVNAMEHERE/tmp/config.file Let us know if that helps

ok, it looks good. we will follow it up on Monday

Hi, cd /home/stor2rrd/stor2rrd grep purestorage-alias01 etc/storage-list.cfg mask password entry to do not be visible here BTW also this output, I see some permission issue, not related to your problem ls -l logs

Hi, can you send us complete iostat -Dsal 60 1 support@stor2rrd.com

I do not understand

Hi, we are aware of that, our latest code has that already fixed.You can ignore it for now.

http://www.lpar2rrd.com/download/lpar2rrd-agent-6.01-8.noarch.rpm

Hi, your right, fixed, do you want to get a rpm with that fix? Thanks!

ok, got it now.No, there is not implemented any granularity, just single emil and/or SNMP TRAP server You are the first one who missing it

no :) Alerting cfg : folow the settings icont on the top right --> Alerting

sure :)

Hi, sure, define new alert, new email group and assign it to the new alert.