Pavel

Lack of CPU resources. 

With REST API we must get data every 20 minutes (HMC
saves it for last 30 minutes only) and when load does not fit then the gap
occurs. 


ok, send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com

Hi, most probably you have wrong time (TZ) on the HMC.Check if HMC time and lslparutil time is more less same on below output and is correct.Fix it if it is not, do not forget reboot the HMC when you change the timezone, it is a must. su - lpar2rrdcd /home/lpar2rd/lpar2rrd./bin/sample_rate.sh

Hi, just interfaces with IP assigned whould be presented. Has you vlan interfaces assigned an a IP? do you seen any difference in entstat output? entstat -d <interface>| grep "Bytes"sleep 60entstat -d <interface>| grep "Bytes" same for the other interface on the other command line session Is delta values more less same for…

Hi, that version complies with Storwize ssh session limits, there should be 24 ssh sessions per an hour, not more. Send us logs, we will check if all works as expected, 24 sessions should not be a problem at all. It could be further decreased to half if saamle rate is increased to 10 minutes. Note a short problem…

Hi, what is your product version?stor2rrd v2.60 reduced number of required ssh sessions significatly.

Hi, there is no Removed directories. Items from Removed disappear after 2 or 3 months (I am not sure now) without updating. You need the latest version 6.11

Hi, screenshot pls. Upload it into below link upload.lpar2rrd.com Why have you reboot it?Any changes recentky? Also logsNote a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us…

Hello, we will follow it up at start of 2020

Hi, VMAX does not provide healt status through the REST API, perhaps in Unisphere 9.x it could be but we do not have access to it to test it. https://www.dell.com/community/VMAX/VMAX-REST-API-query-to-check-system-hardware-health/td-p/7140860 We are not aware any method how to get health status from Unisphere.

Hi, we have already fixed it in config_ check.sh but forgotten about DeviceConnTest.pm, thanks!

Hi, what exactly? The latest stor2rrd version is 2.61.If you have installed it then check : UI --> settings icon --> About

Hi, ok your right, it is FAS CDOT in fact. So far AFF A-series behavies like FAS 7MODE what is wrong.We will fix it in the next release, use CDOT till then.

Hi, do you want to remove all vCenter data or just selected one?

Hi, we need "full" read-only rights to the vcenter, we do not support it with restricted rights, we do not test it etc

Hi, what is your stor2rrd version?

Hi, we need logs, I do not know where is lpar2rrd working directory.It is about lpar2rrd server.

Hi, logs pls.Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com screenshot would also be helpfull.

Hi, have you followed CMODE or 7mode configuration in https://www.stor2rrd.com/NetApp-monitoring.htm? Try to conifgure it in the UI --> storage as NetApp FAS CDOT, if that does not work then try FAS 7mode Let us know.

Hi, what storage is that exactly?

yep, CPU metric will be alway higher.

Hi, read this: https://www.lpar2rrd.com/wrkactjob.htm wrkactjob and cputop are based only on top10 processys for every minute, real used CPU will be always higher depends on usage of the LPAR. basically wrkactjob and cputop is monitoring solution mainly for jobs running long time and using a lot of CPU.

Hi, send us a screenshot(s) to: support at lpar2rrd dot com

Hi, Send us logs. Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

google search 1. perl-Data-Dumper rhel6 yum repository2. perl-Env rhel6 yum repository

or email: support at stor2rrd dot com

Hi, I cannot see pictures, but send us this from the agent side:ls -ltr /var/tmp/lpar2rrd*tail /var/tmp/lpar2rrd*err cat /var/tmp/lpar2rrd-agent1.out https://upload.stor2rrd.com

Hi, it is definitelly supported, our virtual appliance is based on CentOS 6.Check internet how to install these packages likehttps://access.redhat.com/solutions/3270341https://centos.pkgs.org/6/openfusion-x86_64/perl-LWP-Protocol-https-6.03-1.of.el6.noarch.rpm.html....

Hi, you can definitelly set to do not expire user password. Check vCenter ... Let me understad that, monitoring running fine just for 3 hours? Then you have to recreate user on vCenter?

$PERL vmware-lib/apps/connect.pl --server <vCenter host> --username "lpar2rrd@your_domain" --password "XXXXX"