Pavel

ok, send us logs Note a short problem description in the text field of the upload form (refere to this issue) cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, are you at the latest stor2rrd version 2.60+?

Hi, yep, data is similar, we present just what we get from entstat, it is correct on our side as you can see it. We have already got a fdew other users with the same issue.It is always same, entstat reporting nearly same data throughput.I do not know how it is possible, it is more question for AIX support.

Hi, upgrade to the latest product level 2.61, it could be fixed there.let us know if the problem persist.https://www.stor2rrd.com/download-xorux.htm?1.1https://www.stor2rrd.com/upgrade.htm?1.1

Hi, - stor2rrd version- datacore rest api version- is that happen for all you datacore storages

Hi, the agent does not listen anywhere.The agent sends the data to the IP which is configured.

Hi, I do not understand, use IP of lpar2rrd server (as per docu), it is all you need, rest is about routing in your LAN/WAN.

Hi, we graphing what the storage is reporting.It is all we can say. Especially when there is very little IO load, then some values might not be trusthworthy.

Hi, do you have proper time on the HMC? ssh hmc "date" If you use HMC CLI (ssh) access then assure lslparutil time is more less same as the HMc time in this output su - lpar2rrdcd /home/lpar2rrd/lpar2rrd./bin/sample_rate.sh

Hi, yep, Nutanix :)It is something what is planed for this year.When we got time and all goes good then end of Q2 earliest. But rather beta than an official release. We will cotact you as soon as we have something for testing.

Hi send us logs. Note a short problem description in the text field of the upload form (refere to this thread). cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, sorry, but this is not general Hyper-V discussion forum.It is dedicated only to issues with Hyper-V performance monitoring tool called lpar2rrdhttps://www.lpar2rrd.com/Hyper-V-performance-monitoring.php

Hi, su - stor2rrd (lpar2rrd on the appliance)cd /home/stor2rrd/stor2rrd./bin/config_check.sh <storage alias>

Hi, send us logs.Any change in yoru environment on 16th of Dec? I see that before it worked. Any storage firmware upgrade etc? Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us…

Hi, ok, DD will work fine with 10 minute schedulle. we do not save volume capacity data on any storage we support, might be in the future ..

Hi, this will not work, you have to run it every 5 minutes from crontab # NetApp FAS : C-mode 0,30 * * * * /opt/stor2rrd/load_netappperf.sh > /opt/stor2rrd/load_netappperf.out 2>&1 --> 0,5,10,15,20,25,30,35,40,45,50,55 * * * * /opt/stor2rrd/load_netappperf.sh > /opt/stor2rrd/load_netappperf.out 2>&1 same with other…

Hi, 1. do you have installed xmllint? xmllint --version 2. send us logs Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, ok, let us know when it still appears.If so send us logs and a screenshot from the UI.

Lack of CPU resources. &#13;&#13;With REST API we must get data every 20 minutes (HMC&#13;saves it for last 30 minutes only) and when load does not fit then the gap&#13;occurs. &#13;&#13;

ok, send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com

Hi, most probably you have wrong time (TZ) on the HMC.Check if HMC time and lslparutil time is more less same on below output and is correct.Fix it if it is not, do not forget reboot the HMC when you change the timezone, it is a must. su - lpar2rrdcd /home/lpar2rd/lpar2rrd./bin/sample_rate.sh

Hi, just interfaces with IP assigned whould be presented. Has you vlan interfaces assigned an a IP? do you seen any difference in entstat output? entstat -d <interface>| grep "Bytes"sleep 60entstat -d <interface>| grep "Bytes" same for the other interface on the other command line session Is delta values more less same for…

Hi, that version complies with Storwize ssh session limits, there should be 24 ssh sessions per an hour, not more. Send us logs, we will check if all works as expected, 24 sessions should not be a problem at all. It could be further decreased to half if saamle rate is increased to 10 minutes. Note a short problem…

Hi, what is your product version?stor2rrd v2.60 reduced number of required ssh sessions significatly.

Hi, there is no Removed directories. Items from Removed disappear after 2 or 3 months (I am not sure now) without updating. You need the latest version 6.11

Hi, screenshot pls. Upload it into below link upload.lpar2rrd.com Why have you reboot it?Any changes recentky? Also logsNote a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us…

Hello, we will follow it up at start of 2020

Hi, VMAX does not provide healt status through the REST API, perhaps in Unisphere 9.x it could be but we do not have access to it to test it. https://www.dell.com/community/VMAX/VMAX-REST-API-query-to-check-system-hardware-health/td-p/7140860 We are not aware any method how to get health status from Unisphere.

Hi, we have already fixed it in config_ check.sh but forgotten about DeviceConnTest.pm, thanks!

Hi, what exactly? The latest stor2rrd version is 2.61.If you have installed it then check : UI --> settings icon --> About