Pavel

Hi, Send us logs. Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, deninitelly not :) Was there any volume configured before?Stoarage appers there only of there is at least single volume configured. We got logs but you have not provide a storage name.

usually this could be enough: # vi /opt/freeware/etc/httpd/conf/httpd.conf # Secure (SSL/TLS) connections Include conf/extra/httpd-ssl.conf To stop http commant out its listen port: vi /etc/httpd/conf/httpd.conf Listen 80 --> #Listen 80 apachectl restart

Hi, just enable https (ssl module) in apache and disable http

Hi, send us logs Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, use --force, it will resolve it, we have already seen it like: rpm -ivh http://www.stor2rrd.com/download/wbemcli-1.6.3-1.x86_64_RH7.rpm --force

yes, it will be removed and disappears from volume aggregated graphs only.

Hi, data retention: https://www.stor2rrd.com/data_retention.php it can grow only if you have new volumes/lun.Newer version cleans out unused volumes/luns if they are not configured and touched for 3months+ to safe space.

Hi, directly upgrade, it will work :)

hi, ignore previous. it migh have several reasons 1. please try to check Firefox browser console for errors: Press [F12], then click on the "Console" tab. If you don't see any errors try reloading the page again, the error may be generated when the page loads. The console will provide you with the error type, the location…

Hi, ls -l www/jqueryls -l html/jquery

Hi, it cannot be 20 iminutes, it must be 10 minutes, pls confirm it or send a screenshot with time axis visible. It could happen when you initially start with 10 minutes samples, rrdfiless are allocated for 10 minutes sample, switch to 5 mins does not change allocation.You would have to remove all data in data/<storage…

strange, it should work, send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com

Hi Peter, here it is https://www.lpar2rrd.com/download/lpar2rrd-6.16-12.tar implemented in HMC CLI (ssh) and REST API there is a new tab: server --> CPU --> Total which shows server total utilisation (all CPU pools and CPU dedicated lpars) Let us know

just answered directly via email

Hi, 1. what is your perl SDK version and vCenter version? 2. follow this for your platform: https://www.lpar2rrd.com/https.php it might fix it

Hi, well, 5k+ VM is a lot but we have users with 12k+ where it is working.We making still new enahncements in this stuff to keep run load.sh under 1 hour. The best would be upgrade to the latest build to see if that helps:https://www.lpar2rrd.com/download/lpar2rrd-6.16-10.tar You can even increase VMWARE_PARALLEL_RUN in…

Hi, I do not understad that, send us mor screenshots to explain it.use forum or support at lpar2rrd dot com

some sort of symlink would solve that, this is not nice solutionlike this, I hope I am correct based what I see above ln -s /LPAR2RRD/data /home/lpar2rrd/LPAR2RRD/data suppose /home/lpar2rrd/LPAR2RRD/data is removed before

Hi, - it is not related. A9k simple pdoe snot provides number whcih can be seen through its UI.- XIV/A9K do not provide health status through API we use (SMI-S), we could consider SNMP for such purpose

Do you have installed all prerequisites?https://www.lpar2rrd.com/pdf-install.php ais there any error?

Hi, would you have some time for little testing we need for Nutanix development?We are already working on it.We would need to collect some data from real environment which we are not able to simulate in our labs.

Hi Peter, as soon as REST API server/frame total is implemented we start with HMC CLI (ssh) implementation.It should be done in about 2 weeks, I will let you know

Hi, copy over etc/web_config/custom_groups.cfg , keep proper file rights (owned by apache user)

Hi, no way, A9k does no provide right capacity through API we use (SMI-S), it is all I can say.XIV provides it correctly, however not A9k. we cannot do anything ...

you can login via ssh to the appliance, there is root and lpar2rrd account, both have same default password after initial deployment, I will paste it into personal chat

Hi, if both Linuxes are x86_64 (uname -i) then migration is easy 1. set up new server, add all devices (HMC, vCenters ...), make all workinguse same directory as on the source server (or at least make same sym link on the target one) 2. copy over directory /home/lpar2rd/lpar2rrd/data, use tar, not cp, scp ...!!! 3. on the…

Hi, 1.What is this? Do you remove and copy all data again from somewhere? It makes no sense 0 * * * * rm -rfv /home/lpar2rrd/LPAR2RRD/data/* && cp -r /LPAR2RRD/data/* /home/lpar2rrd/LPAR2RRD/data 2. you do not need to connect the HMC, it should work without it, exactly as on our demo where is 1 stand-alone IBM i server…

Hi, have you added storage via the UI?Note that older method via etc/storage-list.cfg is not used anymore, check docu ...UI --> settings icon --> storage --> new ....

Hi, send us a screenshot from the UI and logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com