Comments
-
ok, then 5mins is fine. healt status is not available through SMI-S APi we use.or at least it was not available in the time we developed it.
-
XIV is not able to get all necessary data in 5 minutes.Well, it was the issue in the past, perhaps newer models are capacble to do it especially if there is no thousads of volumes. You can try even 5 minutes, you will see ...
-
Hi, use 10 minutes for XIV
-
send us logs if you can Note a short problem description in the text field of the upload form, specify what storage devices does not work. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com
-
Hi, make sure there is enough of CPU resources When it is ok, send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com
-
Hi, you run the agent from lpar2rrd's and even root's crontabs, it is wrong, stop one of them. I need some data from lpar2rrd server, you are a customer, drop an email to our support.
-
Hi, check what fcstat provides for past minute, number ared counters, you have to do: (last one - previous one)/60 fcstat fcs0 | grep Bytes| tail -2; sleep 60; fcstat fcs0 | grep Bytes| tail -2 BTW you might even hit into this AIX bug we seen that many times: https://www.ibm.com/support/pages/apar/IJ32635
-
Hi, CPU estimator bug is fixed long timeIf you have support then send an email to our support, the best would be start with the latest version 7.21
-
Hi, send us logs Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com
-
Hi, on the agent side this output: date ls -ltr /var/tmp/lpar*tail /bvar/tmp/lpar*err
-
BTW use 32bit rrdtool in case you have already some old data created by iolder versionPERL: /opt/freeware/bin/perl_32RRDTOOL=/opt/freeware/bin/rrdtool_32 Malloc error above is typical for situation when you have 32bit database filess accessed by 64 bit rrdtool.
-
Hi, ok, seen that many times, it is about order in PERL5LIB, try this, I am not sure if these 5.30.3-2 directory exist exactly, adjust them if necessary…
-
Hi, send us logs Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com
-
Hi, do you see data in graphs properly?
-
do you get any error? 32 vr 64 bit problems we already seen many times, got solutions ...
-
Hi, thanks for such info, do you know which firmware will contain that fix?Can you find it out? Thanks!
-
Hi Keith, we have tested max Perl 5.28-1 on our AIXes in labs. It works with rrdtool 1.7.x.I try to upgrade it on the latest levels and will let you know later on this week.
-
Have you upgraded even the xormon to the latest version?
-
Hi, "report based on filesystem" What that means, do you need to save data anywhere? use Reporter feature ...
-
Hi, we support already some Inspur devices like AS 5500/5300/2600/2200 and might be even others.I believe that most of Inspur storage devices are re-brands. Therefore is quite likely that we already support originals. What storage device support exactly are you looking for?
-
yes, either deploy 2 instances or cluster it via the OS level cluster
-
Hi, there no such docu, however it is quite simple 1. install the tool somewhere as per instructions2. enable necessary network access to the storage as per table on the bottom of https://stor2rrd.com/install.php#storages3. add storage devices as per install manual.
-
Hi, what storage exactly do you want to add?Anyting on our voting list? https://stor2rrd.com/voting.php New devices must be added by us, there is no any generic API We add new device when there is general user demand for it or if the vendor or whoever else pays for its implementation.
-
Hi Chris, it is ok, there is not impelented historical reporting for OpenShift yet.
-
send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com
-
Hi, 1. can you log on to the HMC UI with lpar2rrd user credentials? 2. as per docu: https://lpar2rrd.com/IBM-Power-Systems-performance-monitoring-installation.php?5.0#HMCRESTAPI Allow remote access via the web: HMC ➡ Manage User Profiles and Access ➡ select lpar2rrd ➡ modify ➡ user properties ➡ Allow remote access via the…
-
send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com
-
I mean monitor it via lpar2rrd
-
Do you monitor that VM via virtualisation management station (like VMware, Hyper-V, RHV ...)
-
is hostanme stnsvpeadb201 same as the VM name?
Howdy, Stranger!