Pavel

Hi, we see that for the first time. This procedure normally works. Can you contact Hitachi support?

Hi, ok, send us this file:cd /home/stor2rrd/stor2rrd tmp/menu.txt https://upload.stor2rrd.com describe a problem in the upload form.

Hi, I think I know what happened.You have at first migrated your LPARs and after that you have attached new HMCs to lpar2rrd server.This situation is not properly handled, usually HMCs are connected first.Anyway, we have a fix for that just from last week. Upgrade to this version, when it is not fixed immediately then it…

Hi, your right, it is not implemented.It will be available in the next release where it will be a must because all storage configuration will be done through the UI.

Hi, You have downloaded 32bit package. You're on a 64-bit system, and don't have 32-bit library support installed. To install (baseline) support for 32-bit executables https://stackoverflow.com/questions/8328250/centos-64-bit-bad-elf-interpreter

Hi, basically AMS is supported except quite historical firmwares.Definitelly try it, if it does not work then let us know, we will check logs and let you know.

Hi, try to upgrade to this version, it should fix menu issue (standalone ESXi vrs vCenter) https://www.lpar2rrd.com/download/lpar2rrd-6.02-18.tar

Hi, upgrade to this version, ACL Linux issue is fixed there:https://www.lpar2rrd.com/download/lpar2rrd-6.02-18.tar

Hi, here are hot fixes, let us know if the problem is resolved. https://www.stor2rrd.com/download/hp3parperf.pl.gz -rwxrwxr-x 1 stor2rrd stor2rrd 21113 Jun 4 08:09 bin/hp3parperf.pl Gunzip it and copy to /home/stor2rrd/stor2rrd/bin (755, stor2rrd owner) If your web browser gunzips it automatically then just rename it: mv…

Hi, 1. configure old storage on a new appliance (use same alias)2. copy data from old instance to the new onecd /home/stor2rrd/stor2rrd/data/<v3700 storage alias> Just above directory copy over <v3700 storage alias> It is basically all. You should see all history on a new appliance

Hi, thanks for confirmation!yep fix will appear in the next release.

It is caused by very low traffic on the storage (0 IOPS on most of volumes) When there is traffic like this then latency in not important anyway.We cannot do too much with that on our (stor2rrd side) anyway

Hi, ok, I see it, it is something we see for the first time, we will have to adopt our code.We will let you know as soon as it is done, thanks for notifying us.

Hi, logs plsNote a short problem description in the text field of the upload form. storage=<storage name> cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs/*$storage tmp/$storage*txt logs/sys.log logs/error.log logs/error-cgi.log gzip -9 logs.tar Send us logs.tar.gz via…

Hi, try this hot fix, installation is same as previous time.Let us know if that resolve the issue. https://www.lpar2rrd.com/download-static/C_RTVSTS.zip

Hi, try this version, there has been some related changel recently:https://www.lpar2rrd.com/download/lpar2rrd-6.02-15.tar upgrade procedure: https://www.lpar2rrd.com/upgrade.htm?5.6 Let us know if the problem is resolved or now.

Hi, wow, it is prety big environment! Use this as a hot fix, it will resolve the issue https://www.lpar2rrd.com/download/load.sh.gz -rwxrwxr-x 1 lpar2rrd lpar2rrd 22664 May 27 12:32 load.sh Gunzip it and copy to /home/lpar2rrd/lpar2rrd/ (755, lpar2rrd owner) If your web browser gunzips it automatically then just rename it:…

Hi, product version pls.

Hi, Thanks for the tip!It is possible but we do not want to go for it.This is behind of our scope. We want to monitor only most important performance metrics. We do not want to monitor all metrics we are able to get. This is something definitelly useful, we know it, but from performance point it is not most important.…

Hi, do you have other lpars with 1.1.6 installed. Are they working fine?What was your previous version? 1.1.5? If that worked befor with 26 Pools then it should work even now.

Hi, this model is not supported, basically such storage does not provide any performance data.read here: https://www.stor2rrd.com/EMC-VNXe-support.htm

ok, thanks, I think it is enough for identification

what was resolution? HMC reboot? Where this error appeared? Any particual HMC log? thanks

Hi, basically yes, this happens when connection to one HMC hangs. You are the first one reporting it, we have never seen it till now.

Hi, also definitelly upgrade to 6.02, there was a lot of improvements and optimisations on the back-end.

Hi, VMWARE_PARALLEL_RUN is correct variable :) # grep VMWARE_PARALLEL_RUN bin/* bin/vmw2rrd.pl:if ( defined $ENV{VMWARE_PARALLEL_RUN} ) { bin/vmw2rrd.pl: $PARALLELIZATION = $ENV{VMWARE_PARALLEL_RUN}; Charts are not created in advance.What is your product version? Try to increase paralle run to 20. Let us know.

Hi, everything is possible, it is only about our time and priorities :) There is no such option at the moment.I will note it in our TODO however I cannot promise implementation anyntime soon.Basically you are the first one asking about it (means not big general demand for it) and you are not a customer.

Hi, use this as a fix, backup original one https://www.stor2rrd.com/download/main.js.gz -rw-rw-r-- 1 stor2rrd stor2rrd 320550 May 15 09:23 html/jquery/main.js Gunzip it and copy to /home/stor2rrd/stor2rrd/html/jquery/main.js (755, stor2rrd owner)/home/stor2rrd/stor2rrd/www/jquery/main.js (755, stor2rrd owner) If your web…

ok, got it :)

Hi Alexey, can you also share how to use it? It is not clear to me as someone who has just limited IBM i knowledge :) readme file? Thanks!