Pavel

Hi, ok your right, it is FAS CDOT in fact. So far AFF A-series behavies like FAS 7MODE what is wrong.We will fix it in the next release, use CDOT till then.

Hi, do you want to remove all vCenter data or just selected one?

Hi, we need "full" read-only rights to the vcenter, we do not support it with restricted rights, we do not test it etc

Hi, what is your stor2rrd version?

Hi, we need logs, I do not know where is lpar2rrd working directory.It is about lpar2rrd server.

Hi, logs pls.Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com screenshot would also be helpfull.

Hi, have you followed CMODE or 7mode configuration in https://www.stor2rrd.com/NetApp-monitoring.htm? Try to conifgure it in the UI --> storage as NetApp FAS CDOT, if that does not work then try FAS 7mode Let us know.

Hi, what storage is that exactly?

yep, CPU metric will be alway higher.

Hi, read this: https://www.lpar2rrd.com/wrkactjob.htm wrkactjob and cputop are based only on top10 processys for every minute, real used CPU will be always higher depends on usage of the LPAR. basically wrkactjob and cputop is monitoring solution mainly for jobs running long time and using a lot of CPU.

Hi, send us a screenshot(s) to: support at lpar2rrd dot com

Hi, Send us logs. Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

google search 1. perl-Data-Dumper rhel6 yum repository2. perl-Env rhel6 yum repository

or email: support at stor2rrd dot com

Hi, I cannot see pictures, but send us this from the agent side:ls -ltr /var/tmp/lpar2rrd*tail /var/tmp/lpar2rrd*err cat /var/tmp/lpar2rrd-agent1.out https://upload.stor2rrd.com

Hi, it is definitelly supported, our virtual appliance is based on CentOS 6.Check internet how to install these packages likehttps://access.redhat.com/solutions/3270341https://centos.pkgs.org/6/openfusion-x86_64/perl-LWP-Protocol-https-6.03-1.of.el6.noarch.rpm.html....

Hi, you can definitelly set to do not expire user password. Check vCenter ... Let me understad that, monitoring running fine just for 3 hours? Then you have to recreate user on vCenter?

$PERL vmware-lib/apps/connect.pl --server <vCenter host> --username "lpar2rrd@your_domain" --password "XXXXX"

Hi, Do you have attached same vCenter on both lpar2rrd instances? Does it work properly with one lpar2rrd instance? I do not ubnderstad why do you have to change passowrd. rd when both instances working correctly for some time. What is exactly "period of time"? Months? Does not expire lpar2rrd password in vCenter? Can you…

Hi, not defined yet, already working on it a few months with Oracle specialists.I expect end of Q1 2020, beta even sooner.

Hi, as per 1.Is this working when you place there your passwd instead of XXXX ? smis command failed: /usr/bin/wbemcli -noverify -nl ei https://stor2rrd:XXXX@192.168.28.103:5989/root/smis:CIM_ComputerSystem

Hi, shell special characters will not work in password, assure there is no &*#@$[]{}"'|\ at least

Hi, 1. can you run that wbemcli command from command line, just replace XXXX by your password2. assure that passowrd does not contain special character like *$#@ etc 3. what role has stor2rrd user? monitor? Can you try switch to standard role (new firmwares require that)

englis pls

Hi, a problem with ssh key exchange, try to exachnge it again or send us a screenshooot what have you done to: support at stor2rrrd com

Hi, you can manually edit etc/web_config/devicecfg.jsonit simple json format, then copy&paste new section, and change just names and IP.make backup at first.That file must be writable for apache user.

wait an hour, then Ctrl-F5 in the UI. If still nothing then send us logsNote a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

no, use the GUI only.

Hi, use only the GUI, lan-list.cfg is ignored since version 2.60+

Hi, if you have stor2rrd 2.60+ then nothing reads storage-list.cfg.Pls let us know what you have done, it is weird.