Pavel

Hi, upgrade to this version, context is implemented ther for VSPG/HNAShttps://www.stor2rrd.com/download/stor2rrd-2.71-7.tar

ok, it explains it :)

It is correct.can you run upgrade once more from command line?https://www.lpar2rrd.com/upgrade.php provide output.Do you have anough of space on the filesystem? Then ls -l /home/lpar2rrd/lpar2rrd/bin/VmwareDataWrapper.pm

md5sum lpar2rrd-6.16.tar

Hi, ls -l /home/lpar2rrd/lpar2rrd/bin/VmwareDataWrapper.pm

Hi Jeff, our dev team just confirmed that the tool uses cokie based authentification It has been always used.

Hi, send us logs from the Solaris agent side:cd /var/tmpls -ltr lpar*tail *errhead *txtcat lpar*out support at lpar2rrd dot com or https://upload.lpar2rrd.com

Hi Jeff, thanks for hints and advices!we will definitelly follow user authentification advices. regarding performance stuff. It is definitelly useful, however most of that is behind of our monitoring targed, we do not monitor such metrics generally even for other storages. The tool is intended as a front-end tool which can…

Hi, Looks like corrupted etc/web_config/users.json there should be a backup copy of that file incd /home/lpar2rrd/lpar2rrd ls -ltr etc/.web_config/users.json-* 1. make backup of actual onecp etc/web_config/users.json etc/web_config/users.json-bad 2. revert back the latest onecp etc/.web_config/users.json-<timestamp>…

yep :) you can remove just /var/www/cgi-bin/* to exclude just TZ setting script

Hi, nohing has changed, just want to correct you.It is possible/feasible to implement it, however there is no general demand for it.That is why we will not go for it. We could potentially re-consider it if you were our customer.

Hi, it works even on stand-alone windows hosts.My colleague will follow it up, we will need some logs

Hi, rm -rf /var/www/html/* /var/www/cgi-bin/*

Ctrl-F5, other browser, clean browser case

Hi, we will implement it for VSPG/HNAS only so far, give us a week.We will contact you regarding of testion that.

Hi, There was Daylight Saving Time last weekend, right? Are you on AIX? There is a problem of rrdtool on AIX after Daylight Saving Time, we know that for years but no idea what we can do, problem is not in our software. It does not happen for all AIX users. Problem disappears when Daylight Saving Time change is more than…

well, I do not understand that fully, no big experience with HNAS, however, do you think that even for HNAS you need to have possibility to set snmp context in stor2rrd cfg?Would that resolve the issue?

Hi, ok, this must be implemented, it does not sound like a big deal, rather small enhancement. Just a question, is not that HNAS? There we use snmp for NAS stats.It is supported by stor2rrd but even there we do not need to set Context.

Hi, this must return some data (replace XXXX for your password) /usr/bin/wbemcli -noverify -nl ei https://stor2rrd:XXXX@172.17.1.214:5989/root/hpq:CIM_ComputerSystem

Hi, at first, it is not about Traps. We do SNMP get to pool regulary storage event log. Why is mandatory SNMP context? We do not use it, it works for everyone without it.

Hi, is that MSA gen3+?

yes

Hi, block size is determined by: data rate/IOPS Do you see increase of data rate and IOPS during on your volume during your test?

no this is not a problem, looks like it is not processing new xml file, latest processed isdata/DS211/svc.config.backup.xml.check from 15th of March.I suppose there is still old configuration. send ustar cvf d1.tar data/DS211/*xml* logs/*DS211gzip -9 d1.tarhttps://upload.stor2rrd.com refere to this case

storage probably did not provide data, definitelly not by design :)

it is something what have added to the product in 2015, since then it bahaves same, it remembers latest state and recover it when it is started again

this one looks actual: data/DC-DS20/svc.config.cron.xml_78E02E9-1this is provided by the storfage, edit it and check if there are such hostanmes, they will be thereIf so then storage reporting them to us. It must be a storage issue the.

1. it looks fresh, is information inside correct? cat data/<storage>/HOST/hosts.cfg

Hi, yes, it is supported since that version.

1. date cd /home/stor2rrd/stor2rrdls -l data/<storage>/HOST*/ls -l data/<storage>/*xml*