Pavel

Hi, it is known issue, what is your lpar2rrd version, older than 6.15? Then1. Uprade lpar2rrd to the latest level 7.00 2. rm -r /home/lpar2rrd/lpar2rrd/vmware-lib 3. install VMware perl SDK 6.7 again, same as before

Hi, I am wandering that storage alowed msuch character, most of storage devices do not allow special characters in names.Ok, escaping can bring further problems across our tool, the easies way to workaround it is removing it.This is easy, we can provide you a patch quickly.

Hi, what kind of storage are you talking about?

Hi, I think it is hard to compare 3PAR to any other storage although we are trying to somehow normalize its dat. I far as I remember then this could be truth, let me know if does not 3par "used" == storwize "capacity"

Hi, example plswhat storage ty is it?is that ony about single volume?

Hi this must work:/usr/bin/snmpwalk -v 2c -c public xx.xxx.xx.xx 1.3.6.1.2.1.1.5 Check it on your other MDS.Compare settings of them, SNMP, access list ...

Hi, place there this file: https://www.stor2rrd.com/download-static/dothillperf.pl.gz -rwxrwxr-x 1 stor2rrd stor2rrd 109101 May 18 14:56 bin/dothillperf.plGunzip it and copy to /home/stor2rrd/stor2rrd/bin/dothillperf.pl (755, stor2rrd owner)If your web browser gunzips it automatically then just rename it: mv…

Hi, I suppose this does not work:/usr/bin/snmpwalk -v 2c -c public xx.xxx.xx.xx 1.3.6.1.2.1.1.5 it could be about switch setup, follow this: https://stor2rrd.com/install.php#SAN Is that only switch whic does not work? have you tried others?

Hi, this should not affect anything, it is just printed into the error log.volumes.cfg being refreshed as per actual storageb configuration.Is that volume seems be some system one when started with the dot?

Hi, Total transfered MB per LPAR --> scroll down: SAN: https://demo.lpar2rrd.com/?menu=df7d585&tab=8LAN: https://demo.lpar2rrd.com/?menu=df7d585&tab=7 I do not understand this: "but a large proportion of the aaS target costs are data egress"

ok, then it has nothing with that port, go for IBM support ....

then it hangs on the storage, involve IBM support, we are not able to help you, DScli is not our software

it is filtered by a firewall

pls this output again telnet <IP> 1751

output pls failed means that it hangs, got reset packet .... base on that is posible to find out what happened if firewall filters it, if nothing liste on thet port on the storage ...

telnet <IP> 1751

open this port as per above message:TCP connection to X.X.X.X:1751 has failed! Open it on the firewall. (Warning)

are you sure that you have enabled network connection from stor2rrd server to the DS8k? ports 1750, 1751

go for IBM support, DSCli does not work properly

DSCli problem, contact IBM support

is this working? /opt/ibm/dscli/dscli -hmc1 <IP1> -hmc2 <IP2> -user stor2rrd ver -l

the tool gets data every 20 minutes, it is standard, when you do not have large environment you can go for example even to 10 minutes by changing schedulle in crontab0,20,40 * * * * /home/lpar2rrd/lpar2rrd/load_hmc_rest_api.sh > /home/lpar2rrd/lpar2rrd/load_hmc_rest_api.out 2>&1

Hi, you most probably use HMC REST API, data is collectd every 20 minutes, it was always like that.

Hi, screenshot example, zoom it.

Hi, send us logs if possible Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, weird, it works for me in our labs 1. reproduce the error 2. cd /home/lpar2rrd/lpar2rrdtail logs/error-cgi.log

Hi, 1. do you have defined an ssh identity file in storage properties? is not it DSA? 2. you can try to switch to password authentification (latest stor2rrd 7.10+)

Hi, 1. device rename: https://stor2rrd.com/how_to_rename_storage.php2. you can groups devices per location: https://stor2rrd.com/storage-grouping.php

Hi, is that 1hour+ sin ce you have added them?Try Ctrl-F5 in the browser. if nothing then send us logs Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via…

Hi, 1. is HMC test connection working? 2. the agent side, run the agent with "-d" option to force send data immediatelly, any error?$ /usr/bin/perl /opt/lpar2rrd-agent/lpar2rrd-agent.pl -d <LPAR2RRD-SERVER>